...instead of the pointers stored in the array.
Should be faster (inlined) and safer.
Also: suffix explicitly the functions with _SSE2
Change-Id: Ie7de4b8876caea15067fdbe44abfedd72b299a90
Before, a first thread could enter VP8LDspInitSSE2, set
VP8LPredictorsAdd to an SSE2 version BEFORE another thread
would do the memcpy from VP8LPredictorsAdd to VP8LPredictorsAdd_C
thus leading to a C version actually being the SSE2 one (which
would then create an infinite recursion in the SSE2 predictors
at execution).
Change-Id: I224f4ceab31d38f77a1375a7e2636a6014080e3a
Benchmarks from vrabaud@:
8BIT/GRAY corpus speed: faster: -4.3 % , corpus size: unchanged
skal/sources_png_skal corpus speed: faster: -5.2 % , corpus size: unchanged
images/png_rgb corpus speed: faster: -5.1 % , corpus size: unchanged
images/lpcb corpus speed: unchanged, corpus size: unchanged
images/png_big corpus speed: faster: -1.7 % , corpus size: unchanged
images/png_doc corpus speed: unchanged, corpus size: unchanged
images/png_1bit corpus speed: faster: -1.2 % , corpus size: unchanged
images/jpeg_small corpus speed: unchanged, corpus size: unchanged
images/icip_core1 corpus speed: unchanged, corpus size: unchanged
images/png_gray corpus speed: faster: -2.5 % , corpus size: unchanged
images/jpeg_high_quality corpus speed: faster: -4.0 % , corpus size: unchanged
images/jpeg corpus speed: faster: -2.3 % , corpus size: unchanged
images/png_translucent corpus speed: faster: -2.8 % , corpus size: unchanged
images/gif corpus speed: faster: -1.4 % , corpus size: unchanged
images/png_opaque corpus speed: faster: -2.8 % , corpus size: unchanged
images/png_rgb_opaque corpus speed: unchanged, corpus size: unchanged
images/png_indexed corpus speed: faster: -2.0 % , corpus size: unchanged
images/all corpus speed: faster: -1.5 % , corpus size: unchanged
images/png_small corpus speed: unchanged, corpus size: unchanged
images/png corpus speed: unchanged, corpus size: unchanged
images/gif_still corpus speed: faster: -1.6 % , corpus size: unchanged
Change-Id: I69fe11baa188c5d32cbc77a84b8c0deae13d792b
avoiding triplets of data should make it easier to write SSE2 versions.
FilterRow() can now filter all input in one single pass
-> conversion is 15-20% faster (but still overall slow compared to -pre 0)
Change-Id: I14c3215e672fdecde7ec80394e814bdc7445019f
When try_both_modes=0 (that is: -m 0 or -m 1), and the mode is i4,
we were still sometimes falling back to (unexplored, uninitialized) i16 mode,
which resulted in a enc/dec mismatch.
This was mainly occurring for large images (when bit_limit is low enough)
We disable the fall-back by disabling bit_limit using a large MAX_COST threshold.
Change-Id: I0c60257595812bd813b239ff4c86703ddf63cbf8
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I6ad9f93b6c4b665c559bff87716a7b847f66a20d
(cherry picked from commit 342e15f0ce)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I2881bec2884b550c966108beeff1bf0d8ef9f76b
(cherry picked from commit 1147ab4ee7)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I693cbb295df9cf94aa89294b19c0496bdbe84d18
(cherry picked from commit de9fa5074e)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I3d7b689be8d5751248a82d1021243d80d3f67203
(cherry picked from commit deb1b83199)
the min-distortion was quite too low. And we were also
considering the fully skipped macroblocks (nz=0) in the stats.
We need to have at least *some* non-zero dc coeffs (nz=0x100XXXX).
Fix also two typos in StoreMaxDelta: the v0/v1 comparison was wrong,
and the DCs[] coeffs are actually already in ZigZag order.
Change-Id: I602aaa74b36f7ce80017e506212c7d6fd9deba1f
Roughly, if both the source and the reference areas are
darker too dark (R/G/B <= ~6), they are ignored.
One caveat: SSIM calculation won't work for U/V planes,
which are 128-centered and not related to luminance.
But WebPPlaneDistortion() enforces the conversion to RGB,
if needed.
Change-Id: I586c2579c475583b8c90c5baefd766b1d5aea591
Make WebPPictureDistortion() only compute distortion on A/R/G/B planes, not Y/U/V(A).
(not just for SSIM, but PSNR too).
This is to avoid problems with using SSIM on U/V channels.
If Y/U/V distortion is needed, one can always use WebPPlaneDistortion() individually.
Change-Id: If8bc9c3ac12a8d2220f03224694fc389b16b7da9
When compiling as experimental, WEBP_EXPERIMENTAL_FEATURES
would not be defined because the header defining it would
not be included.
Hence runtime errors in debug mode when running:
./cwebp -lossles whatever
...
Error! Cannot encode picture as WebP
Error code: 4 (INVALID_CONFIGURATION: configuration is invalid)
(detail: WebPConfig would have a random value set for
delta_palettization as config.c does not consider
it to exist.)
Change-Id: I41761cffe81a971130ed514b195a73d1c6dac1b7
* prevent 64bit overflow by controlling the 32b->64b conversions
and preventively descaling by 8bit before the final multiply
* adjust the threshold constants C1 and C2 to de-emphasis the dark
areas
* use a hat-like filter instead of box-filtering to avoid blockiness
during averaging
SSIM distortion calc is actually *faster* now in SSE2, because of the
unrolling during the function rewrite.
The C-version is quite slower because still un-optimized.
Change-Id: I96e2715827f79d26faae354cc28c7406c6800c90
If a small hash map can be used, use it to avoid binary search.
This fist hash function that is tried works with the previous
use case of having indexed data in green.
Change-Id: I2f91cec5f3ca7e9c393fd829e69e09bab74f4e7c
some multiplies here and there needed some extra checks
and error reporting. Even if width * height is guaranteed
to be < 2**32, we were multiplying by num_channels and
triggering a 32b overflow.
Some multiplies were not using size_t or uint64_t, additionally.
Change-Id: If2a35b94c8af204135f4b88a7fd63850aa381bbf
The most common conditions are re-ordered and cached.
iter_min was recently introduced to make sure enough iterations
are made in cases where there are many matches (mostly uniform regions).
Now that those are properly analyzed, it becomes useless.
Change-Id: Id3010ee4ec66b84d602fcb926f91eb9155ad27f4
-Skip examining quantized levels that are too high.
-Calculate last_pos_cost only when needed.
Encoding speed for m6 is increased by about 3%;
Compression performance is neutral.
Change-Id: I8af70b049587cca0375d9b3eb00479ec7c0c842a
max_i4_header_bits_ could drop to zero for difficult image and trigger
a loop. Surprisingly, StatLoop() didn't have this bug.
Change-Id: Idc0f9eadef30a2b2f02041b994f25def30901e36
Pick the mode with the smallest alpha.
It only affects m0, in which case the mode decision is not re-examined
later in VP8Decimate(). Tests on some natural content png images show
PSNR increase as well as visual quality improvement.
Change-Id: Iea997e718cd7477160fa05eb7cfb35f4cec2fa9a
SSIM results are incompatible with previous version!
We're now averaging the SSIM value for each pixels instead of
printing a frame-level global SSIM value.
* Got rid of some old code
* switched to uint32_t for accumulation
* refactoring
SSIM calculation is ~4x faster now.
Change-Id: I48d838e66aef5199b9b5cd5cddef6a98411f5673
Having it architecture dependent resulted in an extra
function call of an extern function, hence no inlining and
a 5-10% impact on performance.
Change-Id: I0ff40d2d881edc76d3594213a64ee53097d42450
-print_psnr is now much faster because it doesn't use the SSIM code.
The SSIM speed-up and re-write will come later.
Change-Id: Iabf565e0a8b41651d8164df1266cfeded4ab4823
we don't need to centralize best_uv[] since target_uv[] and best_rgb_uv[]
are already centralized. The diff 'W' was just in the ~[-2,2] range, so
we can ignore the correction.
Overall speed-impact is not large, though. Around ~4% faster conversion.
Output with -pre 4 is expected to be slightly different
Change-Id: Ib59f033955577c49b084d0560108020f42d84102
also: remove the useless clipping in StoreGray()
For speed reason, the 'gray' plane was initialized with the same
value for 2x2 block. But in some cases (underlying camera noise, e.g.),
it could lead to instability during iteration, noise amplification,
and visible banding.
Using a precise (but slower) initialization solves the issue, and
since the convergence is faster, we might actually gain some speed.
Change-Id: I81c42101497e7096a8f60289d710f5a3bcb0ddea
We usually need at least 2 iterations to converge
(and usually not much more after that). Only 1 was not enough.
Change-Id: Iaf802ea81afa2596f4ba045c92f5eaff61623b7b
Set enc->prev_candidate_undecided_ as 0 when a frame is not chosen
as a possible keyframe, so that the dispose method can be
dispose-to-background.
Change-Id: If2899f5dbc06fb53705fb8240072ab6440a6de12
No need to find backward references for pixels in uniform regions
by looking at all pixels.
Only pixels at the same distance from the end need to be compared to.
Change-Id: I4f187e965f0667d3a929775726a412f7e69f6473
if src_{r,g,b} = 0, any value of src_a or dst_a such that
abs(src_a - dst_a) <= max_allowed_diff
was making the test pass, despite being very different-looking pixels.
The fix is to require same values for src_a and dst_a before attempting
an r/g/b comparison.
Change-Id: If3a55a229eab3904ed454f20065e49e35c39f25c
Constants are such that brute force is sometimes faster for some
data (mostly big images it seems).
Change-Id: I90aef536408683535e3b09ddfa2e77a9834038f6
Return key/index if the query is found, and -1 otherwise.
The benefit of this is to save a hashing computation.
Change-Id: Iff056be330f5fb8204011259ac814f7677dd40fe
