- Also, use the term 'fragments' instead of 'tiling' in code
- This makes code consistent with the spec.
Change-Id: Ibeccffc35db23bbedb88cc5e18e29e51621931f8
Use separate fourCCs "XMP " and "EXIF" instead of a common "META"
Also, some refactorization in webpmux.c
Change-Id: Iad3337e5c1b81e785c60670ce28b1f536dd7ee31
the max wasn't checked leading to a rollover case, possibly exploitable.
additionally check the RIFF size early, to avoid similar issues.
pulled from chromium:
http://codereview.chromium.org/11229048/
Change-Id: Ifebc712bf3d3de0129b76ca4c57c68e062abc429
minor revision shouldn't matter, we only check major revision number.
Bumped all version numbers so that incompatibility starts *now*
Change-Id: Id06c20f03039845ae4cfb3fd121807b931d67ee4
moves the implementation to ParseHeadersInternal. this also allows
decoding to start at a VP8X sub-chunk, e.g. 'ALPH'.
Change-Id: I06791f87d90f888de32746ecb02705e4b0ff227a
ParseVP8X was checking for presence of extra 20 bytes (after RIFF header).
This check should not be executed for non-mux (non-VP8X) images.
Change-Id: I3fc89fa098ac0a53102e7bbf6c291269817c8e47
The new modes are
MODE_rgbA
MODE_bgrA
MODE_Argb
MODE_rgbA_4444
It's binary incompatible, since the enums changed.
While at it, i removed the now unneeded KeepAlpha methods.
-> Saved ~12k of code!
* made explicit mention that alpha_plane is persistent,
so we have access to the full alpha plane data at all time.
Incremental decoding of alpha was planned for, but not
implemented. So better not dragged this constaint for now
and make the code easier until we revisit that.
Change-Id: Idaba281a6ca819965ca062d1c23329f36d90c7ff
Change the lossless signature to 0x2f
Add 1 bit indicator for 'droppable (or trivial) alpha)'.
Add 3 bit lossless version (for future extension like yuv support).
Change the sub-resolution information to 3 bits implying range [2 .. 9]
Change-Id: Ic7b8c069240bbcd326cf5d5d4cd2dde8667851e2
Previously, it used to assume any raw bitstream is a VP8 one.
Also,
- Factor out VP8CheckSignature() & VP8LCheckSignature().
- Use a local var for *data_ptr in ParseVP8Header() for
readability.
Change-Id: I0fa8aa177dad7865e00c8898f7e7ce76a9db19d5
* each with their own decoder instances.
* Refactor the incremental buffer-update code a lot.
* remove br_offset_ for VP8LDecoder along the way
* make VP8GetHeaders() be used only for VP8, not VP8L bitstream
* remove VP8LInitDecoder()
* rename VP8LBitReaderResize() to VP8LBitReaderSetBuffer()
(cherry picked from commit 5529a2e6d47212a721ca4ab003215f97bd88ebb4)
Change-Id: I58f0b8abe1ef31c8b0e1a6175d2d86b863793ead
import changes from experimental 5529a2e^
and enable build in autoconf and makefile.unix; windows will be treated
separately.
Change-Id: Ie2e177a99db63190b4cd647b3edee3b4e13719e9
alpha information is not to be found at RIFF chunks level, not
in the VP8 bitstream (that was a tmp hack)
Change-Id: Idd1629c696b03c26f6f30650d7216f627f1761df
Extend WebP decode functionality to extract Alpha data (support ALPH
chunk) and decode the Alpha plane using Alpha (utils/alpha) core-lib.
Change-Id: I6f0ee1b189c13caba3c1dd9b681383bfd00aa212
For odd-sized chunk-payload, there's one Byte padding at the end to make the
next chunk start at even-address. The chunk-skip logic needs to be updated to
handle such cases.
Change-Id: I8939ed07584a6195092fbe703eb0ea711fa5f153
- Move common defines to dec/webpi.h
- Regularize naming and parameters of various "CheckAndSkip" functions.
Also they return VP8StatusCode for clarity.
- Move WebP header/chunk parsing functions to webpi.h
- Fix a bug in static function GetFeatures()
Change-Id: Ibc3da4ba210d860551724dc40741959750d66b89
To be enabled with the flag WEBP_USE_THREAD.
For now it's only available on unix (pthread), when using Makefile.unix
Will be switched on more generally later.
In-loop filtering and output (=rescaling/yuv->rgb conversion)
is done in parallel to bitstream decoding, lagging 1 row behind.
Example:
examples/dwebp bryce.webp -v
Time to decode picture: 0.680s
examples/dwebp bryce.webp -v -mt
Time to decode picture: 0.515s
Change-Id: Ic30a897423137a3bdace9c4e30465ef758fe53f2
RGB565 and ARGB4444 are only supported through the advanced decoding API.
ARGB being somewhat generic, there's an easy WebPDecodeARGB()
new function for convenience.
Patch by Vikas Arora (vikaas dot arora at gmail dot com)
Change-Id: Ic7b6f72bd70aca458d14e7fdd23679212430ebca
You can now use WebPDecBuffer, WebPBitstreamFeatures and WebPDecoderOptions
to have better control over the decoding process (and the speed/quality tradeoff).
WebPDecoderOptions allow to:
- turn fancy upsampler on/off
- turn in-loop filter on/off
- perform on-the-fly cropping
- perform on the-fly rescale
(and more to come. Not all features are implemented yet).
On-the-fly cropping and scaling allow to save quite some memory
(as the decoding operation will now scale with the output's size, not
the input's one). It saves some CPU too (since for instance,
in-loop filtering is partially turned off where it doesn't matter,
and some YUV->RGB conversion operations are ommitted too).
The scaler uses summed area, so is mainly meant to be used for
downscaling (like: for generating thumbnails or previews).
Incremental decoding works with these new options.
More doc to come soon.
dwebp is now using the new decoding interface, with the new flags:
-nofancy
-nofilter
-crop top left width height
-scale width height
Change-Id: I08baf2fa291941686f4ef70a9cc2e4137874e85e
This is a (minor) bitstream change: if the 'color_space' bit is set to '1'
(which is normally an undefined/invalid behaviour), we add extra data at the
end of partition #0 (so-called 'extensions')
Namely, we add the size of the extension data as 3 bytes (little-endian),
followed by a set of bits telling which extensions we're incorporating.
The data then _preceeds_ this trailing tags.
This is all experimental, and you'll need to have
'#define WEBP_EXPERIMENTAL_FEATURES' in webp/types.h to enable this code
(at your own risk! :))
Still, this hack produces almost-valid WebP file for decoders that don't
check this color_space bit. In particular, previous 'dwebp' (and for instance
Chrome) will recognize this files and decode them, but without the alpha
of course. Other decoder will just see random extra stuff at the end of
partition #0.
To experiment with the alpha-channel, you need to compile on Unix platform
and use PNGs for input/output.
If 'alpha.png' is a source with alpha channel, then you can try (on Unix):
cwebp alpha.png -o alpha.webp
dwebp alpha.webp -o test.png
cwebp now has a '-noalpha' flag to ignore any alpha information from the
source, if present.
More hacking and experimenting welcome!
Change-Id: I3c7b1fd8411c9e7a9f77690e898479ad85c52f3e
going down to strict -ansi c89 is quite overkill (no 'inline',
and /* */-style comments).
But with these fixes, the code compiles with the stringent flags:
-Wextra -Wold-style-definition -Wmissing-prototypes
-Wmissing-declarations and -Wdeclaration-after-statement
Change-Id: I36222f8f505bcba3d9d1309ad98b5ccb04ec17e3
The object WebPIDecoder is available to store the
decoding state. The flow is typically:
WebPIDecoder* const idec = WebPINew(mode);
while (has_more_data) {
// ... (get additional data)
status = WebPIAppend(idec, new_data, new_data_size);
if (status != VP8_STATUS_SUSPENDED ||
break;
}
// The above call decodes the current available buffer.
// Part of the image can now be refreshed by calling to
// WebPIDecGetRGB()/WebPIDecGetYUV() etc.
}
WebPIDelete(idec);
Doing so, one can try and decode new macroblocks everytime fresh
bytes are available.
There's two operating modes: either appending fresh bytes, or
updating the whole buffer with additional data in the end.
The latter requires less memcpy()'s
main patch by Somnath Banerjee (somnath at google.com)
Change-Id: Ie81cbd0b50f175743af06b1f964de838b9a10a4a
