Fixes issue #115.
Define local copies of GUID_WICPixelFormat24bppRGB &
GUID_WICPixelFormat32bppRGBA (and GUID_WICPixelFormat32bppBGRA for
symmetry) to avoid link issues when building against older versions of
the SDK.
Change-Id: I2a26be1b7fe6d970feb3211cf0059e5898e3028d
- remove some unused functions
- move global arrays from data to read only section
- explicitly cast malloc returns; not specifically necessary, but helps
show intent
- miscellaneous formatting
Change-Id: Ib15fe5b37fe6c29c369ad928bdc3a7290cd13c84
Add WebPDataCopy and use it in ReadImage which now returns WebPData*s.
Update ReadData prototype variables used with it to avoid unnecessary
const casting back and forth from void*.
Change-Id: I3f83db6729306eab0db9027b68706c8a7005ec10
- send errors to stderr
- send help to stdout
- add image size to webpmux -info output and send to stdout
- correct webpmux exit values
Change-Id: Ifd8e8493aab33a82765f7b7903cef345d96da9ae
These will report the 7x7-averaged PSNR or SSIM, using the
new internal function WebPPictureDistortion().
This is for information only. These flags have no encoding impact.
+misc opportunistic cosmetics
Change-Id: I64c0a7eca679134d39062e438886274b22bb643f
to 'clean up' the fully-transparent area and make it more compressible
new cwebp flags: -alpha_cleanup (off by default, since gain is not 100% guaranteed)
Change-Id: I74d77e1915eee146584cd61c9c1132a41db922eb
.. where only 2 filtering modes are potentially
tried, instead of all of them. This is fast than the exhaustive 'best'
mode, and not much worse.
Options for cwebp are:
-alpha_filter none
-alpha_filter fast (<- default)
-alpha_filter best (<- slow)
Change-Id: I8cb90ee11b8f981811e013ea4ad5bf72ba3ea7d4
Add predictive filtering option for Alpha plane.
Valid range for filter option is [0, 5] corresponding to prediction
methods none, horizontal, vertical, gradient & paeth filter.
The prediction method 5 will try all the prediction methods (0 to 4)
and pick the prediction method that gives best compression.
Change-Id: I9244d4a9c5017501a9696c7cec5045f04c16d49b
Quite handy and simple (for now).
It's not yet incorporated within the build system (autotools or
makefile.unix), because it gets complicated with OpenGL. TODO(later).
For now, there's some ready-to-use command line for compiling on Linux
or Mac in the header of vwebp.c
Later, this tool will be supplemented with support for animation,
tiling, zooming, etc.
Change-Id: I292972cea4862536afbe8c9ec444c590d152f086
- Support for adding/getting frames/tiles with alpha in webpmux
- For "-info" option in webpmux binary, add alpha related info
Change-Id: Iccd2fd35ab8453dabd74779f12f2844ab76d0538
Updated cwebp (Webp Encoder) binary to support Alpha encoding.
Modified man page and WebP container spec appropriately.
Change-Id: I52f6a5cb3e870c386591e9a7776293fa6a8fb04b
- Add alpha support in mux.
- Remove WebPMuxAddNamedData() and WebPMuxGetNamedData() APIs. Add WebPMuxSetImage(), WebPmuxGetImage() and WebPMuxDeleteImage() APIs instead.
- Refactor code using WebPImage struct.
- Corresponding changes in webpmux binary.
- WebPMuxSetImage()/AddFrame()/AddTile() can now work with data which starts from "RIFF...". This simplifies reading a single-image webp file and adding it as an image/frame/tile in mux.
Change-Id: I7d98a6407dfe55c84a682ef7e46bc622f5a6f8d9
spelling/indent/condense a few lines
removal/restriction of extern "C" usage
add const where applicable
Change-Id: Idd49b3498b1d7fc391724b4cde63706022217cb0
This change adds a command line tool (webpmux) which uses MUX library
for manipulating WebP Mux container. This tool can be used to create a
WebP container file and extract/strip relevant data from the container
file.
Change-Id: If17818239448a428703760747fc84f77586045e4
some png with palette-based alpha channels were incorrectly
treated as alpha-less, causing segfault.
Change-Id: I03883590f9539848d5135d359b6f105d2b14329f
Gathers all DSP-related function (and SSE2 implementations).
Clean-up some unwanted symbolic dependencies so that webp_encode,
webp_decode and webp_dsp are truly independent libraries.
+ opportunistic clean-up:
* remove unneeded VP8DspInitTables(), now integrated in VP8DspInit()
* make consistent use of VP8GetCPUInfo() in the various DspInit() funcs
* change OUT macro to DST
Although it degrades quality, this option is useful to avoid the 512k
limit for partition #0.
If not enough to reach the lower bound of 4bits per macroblock header,
one should also limit the number of segments used (down to -segments 1)
See the man file for extra details.
Change-Id: Ia59ffac13176c85b809ddd6340d37b54ee9487ea
To be enabled with the flag WEBP_USE_THREAD.
For now it's only available on unix (pthread), when using Makefile.unix
Will be switched on more generally later.
In-loop filtering and output (=rescaling/yuv->rgb conversion)
is done in parallel to bitstream decoding, lagging 1 row behind.
Example:
examples/dwebp bryce.webp -v
Time to decode picture: 0.680s
examples/dwebp bryce.webp -v -mt
Time to decode picture: 0.515s
Change-Id: Ic30a897423137a3bdace9c4e30465ef758fe53f2
(release|debug)-dynamic
These configurations will produce a dll in bin/ and an import lib under
lib/.
Currently the -noasm switch in the examples will be disabled for these
builds due to a dependency on VP8EncGetCPUInfo.
Change-Id: I2cbac0064f0e500698d14ffc03200791ca837090
When WEBP_HAVE_(JPEG|PNG) were undefined the stub functions would
produce warnings for unused parameters.
Change-Id: I79b2457c769d1f9382be834162de019c5427f94b
You can now use WebPDecBuffer, WebPBitstreamFeatures and WebPDecoderOptions
to have better control over the decoding process (and the speed/quality tradeoff).
WebPDecoderOptions allow to:
- turn fancy upsampler on/off
- turn in-loop filter on/off
- perform on-the-fly cropping
- perform on the-fly rescale
(and more to come. Not all features are implemented yet).
On-the-fly cropping and scaling allow to save quite some memory
(as the decoding operation will now scale with the output's size, not
the input's one). It saves some CPU too (since for instance,
in-loop filtering is partially turned off where it doesn't matter,
and some YUV->RGB conversion operations are ommitted too).
The scaler uses summed area, so is mainly meant to be used for
downscaling (like: for generating thumbnails or previews).
Incremental decoding works with these new options.
More doc to come soon.
dwebp is now using the new decoding interface, with the new flags:
-nofancy
-nofilter
-crop top left width height
-scale width height
Change-Id: I08baf2fa291941686f4ef70a9cc2e4137874e85e
Replace usage of _WIN32 in examples as this does not guarantee the
presence of wincodec.h.
mingw-w64 notably includes wincodec.h, though other releases do not.
Under cygwin the following can be used for a WIC enabled binary:
./configure --target=i686-pc-mingw32 CC=i686-w64-mingw32-gcc.exe
Change-Id: Ica6a714c3356a8eaf88486a1c3f5aa6adde394c0
Only builds with --enable-experimental require zlib currently.
A base install of mingw will not include the development headers and
library. libwebp itself will now build in such environments.
Additionally, remove -lz from **/Makefile.am, -lz will be added to LIBS
by AC_CHECK_LIB when necessary.
Change-Id: Iae8319cdf00162ecb7ed44661c02f40beb34f155
picture->error_code can be looked up for finer error diagnose.
Added readable error messages to cwebp too.
Should close bug #75 (http://code.google.com/p/webp/issues/detail?id=75)
Change-Id: I8889d06642d90702f698cd5c27441a058ddb3636
