When try_both_modes=0 (that is: -m 0 or -m 1), and the mode is i4,
we were still sometimes falling back to (unexplored, uninitialized) i16 mode,
which resulted in a enc/dec mismatch.
This was mainly occurring for large images (when bit_limit is low enough)
We disable the fall-back by disabling bit_limit using a large MAX_COST threshold.
Change-Id: I0c60257595812bd813b239ff4c86703ddf63cbf8
(cherry picked from commit 0a3838ca77)
the min-distortion was quite too low. And we were also
considering the fully skipped macroblocks (nz=0) in the stats.
We need to have at least *some* non-zero dc coeffs (nz=0x100XXXX).
Fix also two typos in StoreMaxDelta: the v0/v1 comparison was wrong,
and the DCs[] coeffs are actually already in ZigZag order.
Change-Id: I602aaa74b36f7ce80017e506212c7d6fd9deba1f
(cherry picked from commit e4cd4daf74)
some multiplies here and there needed some extra checks
and error reporting. Even if width * height is guaranteed
to be < 2**32, we were multiplying by num_channels and
triggering a 32b overflow.
Some multiplies were not using size_t or uint64_t, additionally.
Change-Id: If2a35b94c8af204135f4b88a7fd63850aa381bbf
(cherry picked from commit 1c36440094)
max_i4_header_bits_ could drop to zero for difficult image and trigger
a loop. Surprisingly, StatLoop() didn't have this bug.
Change-Id: Idc0f9eadef30a2b2f02041b994f25def30901e36
(cherry picked from commit 21e7537abe)
Pick the mode with the smallest alpha.
It only affects m0, in which case the mode decision is not re-examined
later in VP8Decimate(). Tests on some natural content png images show
PSNR increase as well as visual quality improvement.
Change-Id: Iea997e718cd7477160fa05eb7cfb35f4cec2fa9a
(cherry picked from commit 1377ac2ec1)
Average3 created a slowdown of 1-2% in lossless decoding.
Average4 created a slowdown of 2-3% in lossless decoding.
Change-Id: Ic2e62cdd83fc897887ec2bf41ea7cadbada84fe5
...instead of the pointers stored in the array.
Should be faster (inlined) and safer.
Also: suffix explicitly the functions with _SSE2
Change-Id: Ie7de4b8876caea15067fdbe44abfedd72b299a90
Before, a first thread could enter VP8LDspInitSSE2, set
VP8LPredictorsAdd to an SSE2 version BEFORE another thread
would do the memcpy from VP8LPredictorsAdd to VP8LPredictorsAdd_C
thus leading to a C version actually being the SSE2 one (which
would then create an infinite recursion in the SSE2 predictors
at execution).
Change-Id: I224f4ceab31d38f77a1375a7e2636a6014080e3a
Benchmarks from vrabaud@:
8BIT/GRAY corpus speed: faster: -4.3 % , corpus size: unchanged
skal/sources_png_skal corpus speed: faster: -5.2 % , corpus size: unchanged
images/png_rgb corpus speed: faster: -5.1 % , corpus size: unchanged
images/lpcb corpus speed: unchanged, corpus size: unchanged
images/png_big corpus speed: faster: -1.7 % , corpus size: unchanged
images/png_doc corpus speed: unchanged, corpus size: unchanged
images/png_1bit corpus speed: faster: -1.2 % , corpus size: unchanged
images/jpeg_small corpus speed: unchanged, corpus size: unchanged
images/icip_core1 corpus speed: unchanged, corpus size: unchanged
images/png_gray corpus speed: faster: -2.5 % , corpus size: unchanged
images/jpeg_high_quality corpus speed: faster: -4.0 % , corpus size: unchanged
images/jpeg corpus speed: faster: -2.3 % , corpus size: unchanged
images/png_translucent corpus speed: faster: -2.8 % , corpus size: unchanged
images/gif corpus speed: faster: -1.4 % , corpus size: unchanged
images/png_opaque corpus speed: faster: -2.8 % , corpus size: unchanged
images/png_rgb_opaque corpus speed: unchanged, corpus size: unchanged
images/png_indexed corpus speed: faster: -2.0 % , corpus size: unchanged
images/all corpus speed: faster: -1.5 % , corpus size: unchanged
images/png_small corpus speed: unchanged, corpus size: unchanged
images/png corpus speed: unchanged, corpus size: unchanged
images/gif_still corpus speed: faster: -1.6 % , corpus size: unchanged
Change-Id: I69fe11baa188c5d32cbc77a84b8c0deae13d792b
avoiding triplets of data should make it easier to write SSE2 versions.
FilterRow() can now filter all input in one single pass
-> conversion is 15-20% faster (but still overall slow compared to -pre 0)
Change-Id: I14c3215e672fdecde7ec80394e814bdc7445019f
When try_both_modes=0 (that is: -m 0 or -m 1), and the mode is i4,
we were still sometimes falling back to (unexplored, uninitialized) i16 mode,
which resulted in a enc/dec mismatch.
This was mainly occurring for large images (when bit_limit is low enough)
We disable the fall-back by disabling bit_limit using a large MAX_COST threshold.
Change-Id: I0c60257595812bd813b239ff4c86703ddf63cbf8
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I6ad9f93b6c4b665c559bff87716a7b847f66a20d
(cherry picked from commit 342e15f0ce)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I2881bec2884b550c966108beeff1bf0d8ef9f76b
(cherry picked from commit 1147ab4ee7)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I693cbb295df9cf94aa89294b19c0496bdbe84d18
(cherry picked from commit de9fa5074e)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I3d7b689be8d5751248a82d1021243d80d3f67203
(cherry picked from commit deb1b83199)
the min-distortion was quite too low. And we were also
considering the fully skipped macroblocks (nz=0) in the stats.
We need to have at least *some* non-zero dc coeffs (nz=0x100XXXX).
Fix also two typos in StoreMaxDelta: the v0/v1 comparison was wrong,
and the DCs[] coeffs are actually already in ZigZag order.
Change-Id: I602aaa74b36f7ce80017e506212c7d6fd9deba1f
Roughly, if both the source and the reference areas are
darker too dark (R/G/B <= ~6), they are ignored.
One caveat: SSIM calculation won't work for U/V planes,
which are 128-centered and not related to luminance.
But WebPPlaneDistortion() enforces the conversion to RGB,
if needed.
Change-Id: I586c2579c475583b8c90c5baefd766b1d5aea591
Make WebPPictureDistortion() only compute distortion on A/R/G/B planes, not Y/U/V(A).
(not just for SSIM, but PSNR too).
This is to avoid problems with using SSIM on U/V channels.
If Y/U/V distortion is needed, one can always use WebPPlaneDistortion() individually.
Change-Id: If8bc9c3ac12a8d2220f03224694fc389b16b7da9
When compiling as experimental, WEBP_EXPERIMENTAL_FEATURES
would not be defined because the header defining it would
not be included.
Hence runtime errors in debug mode when running:
./cwebp -lossles whatever
...
Error! Cannot encode picture as WebP
Error code: 4 (INVALID_CONFIGURATION: configuration is invalid)
(detail: WebPConfig would have a random value set for
delta_palettization as config.c does not consider
it to exist.)
Change-Id: I41761cffe81a971130ed514b195a73d1c6dac1b7
* prevent 64bit overflow by controlling the 32b->64b conversions
and preventively descaling by 8bit before the final multiply
* adjust the threshold constants C1 and C2 to de-emphasis the dark
areas
* use a hat-like filter instead of box-filtering to avoid blockiness
during averaging
SSIM distortion calc is actually *faster* now in SSE2, because of the
unrolling during the function rewrite.
The C-version is quite slower because still un-optimized.
Change-Id: I96e2715827f79d26faae354cc28c7406c6800c90
If a small hash map can be used, use it to avoid binary search.
This fist hash function that is tried works with the previous
use case of having indexed data in green.
Change-Id: I2f91cec5f3ca7e9c393fd829e69e09bab74f4e7c
some multiplies here and there needed some extra checks
and error reporting. Even if width * height is guaranteed
to be < 2**32, we were multiplying by num_channels and
triggering a 32b overflow.
Some multiplies were not using size_t or uint64_t, additionally.
Change-Id: If2a35b94c8af204135f4b88a7fd63850aa381bbf
The most common conditions are re-ordered and cached.
iter_min was recently introduced to make sure enough iterations
are made in cases where there are many matches (mostly uniform regions).
Now that those are properly analyzed, it becomes useless.
Change-Id: Id3010ee4ec66b84d602fcb926f91eb9155ad27f4
-Skip examining quantized levels that are too high.
-Calculate last_pos_cost only when needed.
Encoding speed for m6 is increased by about 3%;
Compression performance is neutral.
Change-Id: I8af70b049587cca0375d9b3eb00479ec7c0c842a
max_i4_header_bits_ could drop to zero for difficult image and trigger
a loop. Surprisingly, StatLoop() didn't have this bug.
Change-Id: Idc0f9eadef30a2b2f02041b994f25def30901e36
Pick the mode with the smallest alpha.
It only affects m0, in which case the mode decision is not re-examined
later in VP8Decimate(). Tests on some natural content png images show
PSNR increase as well as visual quality improvement.
Change-Id: Iea997e718cd7477160fa05eb7cfb35f4cec2fa9a
SSIM results are incompatible with previous version!
We're now averaging the SSIM value for each pixels instead of
printing a frame-level global SSIM value.
* Got rid of some old code
* switched to uint32_t for accumulation
* refactoring
SSIM calculation is ~4x faster now.
Change-Id: I48d838e66aef5199b9b5cd5cddef6a98411f5673
Having it architecture dependent resulted in an extra
function call of an extern function, hence no inlining and
a 5-10% impact on performance.
Change-Id: I0ff40d2d881edc76d3594213a64ee53097d42450
-print_psnr is now much faster because it doesn't use the SSIM code.
The SSIM speed-up and re-write will come later.
Change-Id: Iabf565e0a8b41651d8164df1266cfeded4ab4823
we don't need to centralize best_uv[] since target_uv[] and best_rgb_uv[]
are already centralized. The diff 'W' was just in the ~[-2,2] range, so
we can ignore the correction.
Overall speed-impact is not large, though. Around ~4% faster conversion.
Output with -pre 4 is expected to be slightly different
Change-Id: Ib59f033955577c49b084d0560108020f42d84102
also: remove the useless clipping in StoreGray()
For speed reason, the 'gray' plane was initialized with the same
value for 2x2 block. But in some cases (underlying camera noise, e.g.),
it could lead to instability during iteration, noise amplification,
and visible banding.
Using a precise (but slower) initialization solves the issue, and
since the convergence is faster, we might actually gain some speed.
Change-Id: I81c42101497e7096a8f60289d710f5a3bcb0ddea
We usually need at least 2 iterations to converge
(and usually not much more after that). Only 1 was not enough.
Change-Id: Iaf802ea81afa2596f4ba045c92f5eaff61623b7b
Set enc->prev_candidate_undecided_ as 0 when a frame is not chosen
as a possible keyframe, so that the dispose method can be
dispose-to-background.
Change-Id: If2899f5dbc06fb53705fb8240072ab6440a6de12
No need to find backward references for pixels in uniform regions
by looking at all pixels.
Only pixels at the same distance from the end need to be compared to.
Change-Id: I4f187e965f0667d3a929775726a412f7e69f6473
if src_{r,g,b} = 0, any value of src_a or dst_a such that
abs(src_a - dst_a) <= max_allowed_diff
was making the test pass, despite being very different-looking pixels.
The fix is to require same values for src_a and dst_a before attempting
an r/g/b comparison.
Change-Id: If3a55a229eab3904ed454f20065e49e35c39f25c
Constants are such that brute force is sometimes faster for some
data (mostly big images it seems).
Change-Id: I90aef536408683535e3b09ddfa2e77a9834038f6
Return key/index if the query is found, and -1 otherwise.
The benefit of this is to save a hashing computation.
Change-Id: Iff056be330f5fb8204011259ac814f7677dd40fe
reserve src/ for the code of the main libraries: libwebp, libwebpdemux
and libwebpmux
+ demote this library to internal only; i.e., don't install the header +
lib with make install
Change-Id: I8c9844db8f494be0fa0a2549a5b75b5cebcf666d
We add the following MSA optimized rescaling functions:
- RescalerExportRowExpand
- RescalerExportRowShrink
Change-Id: Ic1c76065423b02617db94cf0c22bb564219b36e6
We add the following MSA optimized color transform functions:
- TransformColor
- SubtractGreenFromBlueAndRed
Change-Id: Ib182d2b5faa7191f503ce70f0dfde0ac89402fd3
This improves compression by ~5% at default quality.
If only 'allow_mixed' is on (but 'minimize_size' isn't), we continue to
use a heuristic to try one of the two or both.
Change-Id: Ia573a73ea26ad25f9debff759eed69d2b0449e82
The decision is based on the variance between DC values of each
sub-4x4 block. This heuristic is rather ok for predicting whether
the 2nd transform (intra-16) is going to help or not.
The decision threshold varies with quality (=quantization).
It's only used for -m 0 and -m 1, where no full RD-opt is performed.
It actually makes these modes quite faster, with RD curve much
closer to the -m 2 mode.
Change-Id: I15f972db97ba4082cbd1dfd16bee3eb2eca701a8
We add the following MSA optimized encoder quantization functions:
- QuantizeBlock
- Quantize2Blocks
Change-Id: Ie32b442afa99eee62d2ef48942b41116a4e157d3
pre-allocating a sorted[] array for most common cases of small
alphabet size cuts a lot of traffic.
Change-Id: I73ff2f6e507f81b0b0bb7d9801a344aa4bcb038a
+ s/src_a/dst_a/
+ remove unnecessary (void) as expected_num_lines_out is used within the
function
Change-Id: Ic45f798ef22bd19eaabf1a0512d1cf8a201bb4b5
- 6/14/2016: version 0.5.1
This is a binary compatible release.
* miscellaneous bug fixes (issues #280, #289)
* reverted alpha plane encoding with color cache for compatibility with
libwebp 0.4.0->0.4.3 (issues #291, #298)
* lossless encoding performance improvements
* memory reduction in both lossless encoding and decoding
* force mux output to be in the extended format (VP8X) when undefined chunks
are present (issue #294)
* gradle, cmake build support
* workaround for compiler bug causing 64-bit decode failures on android
devices using clang-3.8 in the r11c NDK
* various WebPAnimEncoder improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Mchr
-----END PGP SIGNATURE-----
Merge tag 'v0.5.1'
libwebp-0.5.1
- 6/14/2016: version 0.5.1
This is a binary compatible release.
* miscellaneous bug fixes (issues #280, #289)
* reverted alpha plane encoding with color cache for compatibility with
libwebp 0.4.0->0.4.3 (issues #291, #298)
* lossless encoding performance improvements
* memory reduction in both lossless encoding and decoding
* force mux output to be in the extended format (VP8X) when undefined chunks
are present (issue #294)
* gradle, cmake build support
* workaround for compiler bug causing 64-bit decode failures on android
devices using clang-3.8 in the r11c NDK
* various WebPAnimEncoder improvements
* tag 'v0.5.1': (30 commits)
update ChangeLog
Clarify the expected 'config' lifespan in WebPIDecode()
update ChangeLog
Fix corner case in CostManagerInit.
gif2webp: normalize the number of .'s in the help message
vwebp: normalize the number of .'s in the help message
cwebp: normalize the number of .'s in the help message
fix rescaling bug: alpha plane wasn't filled with 0xff
Improve lossless compression.
'our bug tracker' -> 'the bug tracker'
normalize the number of .'s in the help message
pngdec,ReadFunc: throw an error on invalid read
decode.h,WebPGetInfo: normalize function comment
Inline GetResidual for speed.
Speed-up uniform-region processing.
free -> WebPSafeFree()
DecodeImageData(): change the incorrect assert
Fix a boundary case in BackwardReferencesHashChainDistanceOnly.
Make sure to consider small distances in LZ77.
add some asserts to delimit the perimeter of CostManager's operation
...
Change-Id: I44cee79fddd43527062ea9d83be67da42484ebfc
We add the following MSA optimized color transform functions:
- AddGreenToBlueAndRed
- TransformColorInverse
Change-Id: Iceab3813905955aa8b811253df9188512fc7de3f
(in case no alpha was present in the source .webp,
but user requested some)
Change-Id: I9011d38237907c60d6796a86bd2c72166aa80f27
(cherry picked from commit 06a38c7b1c)
This is essentially a revert of a3611513d2
and cfbcc5ece0.
Here is what happened: there was a corruption bug that eventually
got fixed by 0174d18d8b.
But before finding the root, a3611513d2
and cfbcc5ece0 hid the bug
by not imposing length of 1 when it was actually 2 or 3 (which does help
compression as a litteral is more efficient than an offset and a length
of size 2 or 3).
Change-Id: I6f18fc1f583a51ac9d8aab2508458264047cd493
We only perform a single pass, and swap the final histograms
into the beginning of the array as we go. Therefore, they are
already at the correct place at the end of the pass.
-> HistogramCompactBins() is removed, we just truncate the array.
output is bitwise the same.
Change-Id: I9508c96dda0f8903c927a71b06af4e6490c3249c
output should bit-write the same as before, in both
low_effort and non low_effort modes.
if anything, speed is a tad faster, probably because of the
reduced memory traffic.
Change-Id: Iaa2ddcfda2aaffefe7e5b7bc89216373d1ddb194
MAX_COLOR_COUNT was just a synonym and its use in the header was a bit
strange given the visibility of that define.
Change-Id: I536964ddc14a0c48263191b6afb80695b5a038e6
this function can be called not to decode pixels, but simply
to finish processing (through process_func()) the already decoded
pixels.
Change-Id: I80485e92e3c47f0aa3389476dcb82745a243fc4a
The optimization for (len != MIN_LENGTH) actually only holds for
(len > MIN_LENGTH) but (len < MIN_LENGTH) can now happen as len can
be changed in the loop before.
Change-Id: I3f9f91a540206c80385c5fba96c3d64ab9536752
On the non-fast path (use_8b_decode_=0) for decoding the alpha-mask,
we could end up requesting ApplyInverseTransform() with more rows
to process than NUM_ARGB_CACHE_ROWS. This could only happen on the
very last bottom rows of the image.
* ProcessRows() doesn't need to be fixed, since we never request more
than NUM_ARGB_CACHE_ROWS rows. Added an assert for that.
* the use_8b_decode_=1 case doesn't use argb_cache_, but rather does
the palette-decoding call directly. So, no problem here too.
Only the generic (and rather rare) case of calling ExtractAlphaRows()
was affected.
Change-Id: I58e28d590dcc08c24d237429b79614abcef1db7c
This is getting back to the old behavior which is actually better for
compression and speed with the latest patches.
Change-Id: I35884bab02589297c25d6e1e66dc5f13e05f7aa7
This was defined (slightly differently) at two places. Created a common
method and moved to utils/utils.[hc].
Change-Id: I66c3ac6dea24e0cd2c0eaa5440f3142b4dbbe23b
we don't need to store the resulting histogram, so no need to
call HistogramAddEval().
Allows some signature simplifications...
Change-Id: I3fff6c45f4a7c6179499c6078ff159df4ca0ac53
In case where the same offset is found in consecutive pixels,
the cost computation from one pixel can be re-used for the next.
Change-Id: Ic03c7d4ab95f3612eafc703349cfefd75273c3d7
and also recycle the malloc'd intervals
This avoids quite some malloc/free cycles during interval managment.
Change-Id: Ic2892e7c0260d0fca0e455d4728f261fb4c3800e
In a lot of cases, only one interval is used. This can cause
a lot of malloc/free cycles for only 56 bytes. By caching this
single interval and re-using it, we remove this cycle in most
frequent cases.
Change-Id: Ia22d583f60ae438c216612062316b20ecb34f029
As per the spec
(https://developers.google.com/speed/webp/docs/riff_container), only the
extended file format can contain an unknown chunk. So, when assembling a
WebP file with muxer, whenever there is an unknown chunk present, we
should create a VP8X chunk (even though none of the features are
present).
BUG=webp:294
Change-Id: I5da52d311e1853d40063d0f5026100d4325effaa
