This will allow to work in-place on cropped area later.
Also sped up the inverse gradient filtering in SSE2 (~4%)
Change-Id: I463149eee95d36984328f163a1e17f8cabd87441
This is only possible if the filtering is not VERTICAL or GRADIENT.
Otherwise, we need the spatial predictors and hence need the un-visible
part above crop_top row.
COLOR_INDEX transform is the only transform that is not predicted
from previous row. Applying the same for other transform (spatial
predict, ...) is going to be more involve and use an extra temporary row.
+ remove ApplyInverseTransformsAlpha()
(work is done directly within ExtractPalettedAlphaRows())
+ change back to using filter_ instead of unfilter_func_
Change-Id: I09e57efae4a4af00bde35f21ca6e3d73b35d7d43
this might change some crc slightly, since WebPDequantizeLevels()
performs an analysis pass, counting levels, which impacts the smoothing.
Now, the cropping area is not the same, so minor diffs are expected here
and there.
Change-Id: I3cce1e40c6f11c25b7c841044d637685c5740352
* make ALPHNew/Delete static
* properly init ALPHDec::io_
* introduce AllocateAlphaPlane() and WebPDeallocateAlphaMemory()
* reorganize VP8DecompressAlphaRows()
but we're still allocate the full alpha-plane. Optim will come
in another patch since it's tricky
Change-Id: Ib6f190a40abb7926a71535b0ed67c39d0974e06a
this change will be superseded by patch #335160 eventually, but until then
let's fix the problem temporarily.
Change-Id: Iafd979c2ff6801e3f1de4614870ca854a4747b04
and also pass 'VP8Io* io' extra param to VP8DecompressAlphaRows()
This is somehow in preparation for some memory optimizations in
the 'cropping' case. For now, only the easy crop_bottom case is
optimized.
Change-Id: Ib54531ba057bf62b98422dbb6c181dda626c72c2
new options:
dwebp -alpha_dither
vwebp -noalphadither
When the source was marked as quantized, we use a threshold-averaging
filter to smooth the decoded alpha plane.
Note: this option forces the decoding of alpha data in one pass, and
might slow the decoding a bit.
The new field in WebPDecoderOptions struct is 'alpha_dithering_strength'
(0 by default, means: off). Max strength value is '100'.
Change-Id: I218e21af96360d4781587fede95f8ea4e2b7287a
there's still some malloc/free in the external example
This is an encoder API change because of the introduction
of WebPMemoryWriterClear() for symmetry reasons.
The MemoryWriter object should probably go in examples/ instead
of being in the main lib, though.
mux_types.h stil contain some inlined free()/malloc() that are
harder to remove (we need to put them in the libwebputils lib
and make sure link is ok). Left as a TODO for now.
Also: WebPDecodeRGB*() function are still returning a pointer
that needs to be free()'d. We should call WebPSafeFree() on
these, but it means exposing the whole mechanism. TODO(later).
Change-Id: Iad2c9060f7fa6040e3ba489c8b07f4caadfab77b
rather than symlink the webm/vpx terms, use the same header as libvpx to
reference in-tree files
based on the discussion in:
https://codereview.chromium.org/12771026/
Change-Id: Ia3067ecddefaa7ee01550136e00f7b3f086d4af4
Simply get rid of an intermediate buffer of size width x height, by
using the fact that stride == width in this case.
Change-Id: I92376a2561a3beb6e723e8bcf7340c7f348e02c2
This applies to images with optional chunks (e.g. images with ALPH
chunk,
ICCP chunk etc). Before this, the incremental decoding used to work like
non-incremental decoding for such files, that is, no rows were decoded
until
all data was available.
The change is in 2 parts:
- During optional chunk parsing, don't wait for the full VP8/VP8L chunk.
- Remap 'alpha_data' pointer whenever a new buffer is allocated/used in
WebPIAppend() and WebPIUpdate().
Change-Id: I6cfd6ca1f334b9c6610fcbf662cd85fa494f2a91
-> split libraries further into decoder / encoder
-> add libwebpdecoder.a in Makefile.unix
-> make dwebp link against libwebpdecoder.a in Makefile.unix
also: in makefile.unix, pass EXTRA_FLAGS to LDFLAGS too
(otherwise, -m32 wouldn't work, e.g.)
Change-Id: Ief3da02a729dd86bbaf949ed048836716941657f
This saves ~26 bytes of headers.
* introduce new VP8LDecodeAlphaImageStream() for decoding
* use VP8LEncodeStream() for encoding
* refactor code a bit
still TODO: make the alpha-quality/enc-method user-configurable
Change-Id: I23e599bebe335cfb5868e746e076c3358ef12e71
now, we only use 2 bits for the filtering method, and 2 bits
for the compression method.
There's two additional bits which are INFORMATIVE, to specify
whether the source has been pre-processed (level reduction)
during compression. This can be used at decompression time
for some post-processing (see DequantizeLevels()).
New relevant spec excerpt:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ChunkHeader('ALPH') |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Rsv| P | F | C | Alpha Bitstream... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Compression method (C): 2 bits
: The compression method used:
* `0`: No compression.
* `1`: Backward reference counts encoded with arithmetic encoder.
Filtering method (F): 2 bits
: The filtering method used:
* `0`: None.
* `1`: Horizontal filter.
* `2`: Vertical filter.
* `3`: Gradient filter.
Pre-processing (P): 2 bits
: These INFORMATIVE bits are used to signal the pre-processing that has
been performed during compression. The decoder can use this information to
e.g. dither the values or smooth the gradients prior to display.
* `0`: no pre-processing
* `1`: level reduction
Decoders are not required to use this information in any specified way.
Reserved (Rsv): 2 bits
: SHOULD be `0`.
Alpha bitstream: _Chunk Size_ - `1` bytes
: Encoded alpha bitstream.
This optional chunk contains encoded alpha data for a single tile.
Either **ALL or NONE** of the tiles must contain this chunk.
The alpha channel data is losslessly stored as raw data (when
compression method is '0') or compressed using the lossless format
(when the compression method is '1').
Change-Id: Ied8f5fb922707a953e6a2b601c69c73e552dda6b
* Method #1 is now calling the lossless encoder on the alpha plane.
Format is not final, it's just a first draft. We need ad-hoc functions.
* removed now useless utils/alpha.*
* added utils/quant_levels.h instead
* removed the TCoder code altogether
Change-Id: I636840b6129a43171b74860e0a0fc5bb1bcffc6a
Extend WebP decode functionality to extract Alpha data (support ALPH
chunk) and decode the Alpha plane using Alpha (utils/alpha) core-lib.
Change-Id: I6f0ee1b189c13caba3c1dd9b681383bfd00aa212
This is a (minor) bitstream change: if the 'color_space' bit is set to '1'
(which is normally an undefined/invalid behaviour), we add extra data at the
end of partition #0 (so-called 'extensions')
Namely, we add the size of the extension data as 3 bytes (little-endian),
followed by a set of bits telling which extensions we're incorporating.
The data then _preceeds_ this trailing tags.
This is all experimental, and you'll need to have
'#define WEBP_EXPERIMENTAL_FEATURES' in webp/types.h to enable this code
(at your own risk! :))
Still, this hack produces almost-valid WebP file for decoders that don't
check this color_space bit. In particular, previous 'dwebp' (and for instance
Chrome) will recognize this files and decode them, but without the alpha
of course. Other decoder will just see random extra stuff at the end of
partition #0.
To experiment with the alpha-channel, you need to compile on Unix platform
and use PNGs for input/output.
If 'alpha.png' is a source with alpha channel, then you can try (on Unix):
cwebp alpha.png -o alpha.webp
dwebp alpha.webp -o test.png
cwebp now has a '-noalpha' flag to ignore any alpha information from the
source, if present.
More hacking and experimenting welcome!
Change-Id: I3c7b1fd8411c9e7a9f77690e898479ad85c52f3e
