When try_both_modes=0 (that is: -m 0 or -m 1), and the mode is i4,
we were still sometimes falling back to (unexplored, uninitialized) i16 mode,
which resulted in a enc/dec mismatch.
This was mainly occurring for large images (when bit_limit is low enough)
We disable the fall-back by disabling bit_limit using a large MAX_COST threshold.
Change-Id: I0c60257595812bd813b239ff4c86703ddf63cbf8
(cherry picked from commit 0a3838ca77c515ace2c49738f6976dc8aa3e136c)
the min-distortion was quite too low. And we were also
considering the fully skipped macroblocks (nz=0) in the stats.
We need to have at least *some* non-zero dc coeffs (nz=0x100XXXX).
Fix also two typos in StoreMaxDelta: the v0/v1 comparison was wrong,
and the DCs[] coeffs are actually already in ZigZag order.
Change-Id: I602aaa74b36f7ce80017e506212c7d6fd9deba1f
(cherry picked from commit e4cd4daf746a03aec9fd709ece756e6d39740aff)
max_i4_header_bits_ could drop to zero for difficult image and trigger
a loop. Surprisingly, StatLoop() didn't have this bug.
Change-Id: Idc0f9eadef30a2b2f02041b994f25def30901e36
(cherry picked from commit 21e7537abeb01ad8d5d05c7d27b3f3b22dc85a62)
Pick the mode with the smallest alpha.
It only affects m0, in which case the mode decision is not re-examined
later in VP8Decimate(). Tests on some natural content png images show
PSNR increase as well as visual quality improvement.
Change-Id: Iea997e718cd7477160fa05eb7cfb35f4cec2fa9a
(cherry picked from commit 1377ac2ec1cb81e4a74fa6294ff30a9e4cc584aa)
This avoids potential encoder and decoder mismatch.
Change-Id: I5282d3e168afc6193033ad3fce8fbc35618ab2f5
(cherry picked from commit 386e4ba2f0c5e95bf2ad6042cae46a9ba07a5141)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I6ad9f93b6c4b665c559bff87716a7b847f66a20d
(cherry picked from commit 342e15f0ce1336c94c84afec48d14bbc606779a0)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I2881bec2884b550c966108beeff1bf0d8ef9f76b
(cherry picked from commit 1147ab4ee7ff33c418279944aa17b5a43c6ec706)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I693cbb295df9cf94aa89294b19c0496bdbe84d18
(cherry picked from commit de9fa5074ebc51ca59c435da3a05cd108d06a7bf)
avoids int rollover when working with large input
BUG=webp:312
Change-Id: I3d7b689be8d5751248a82d1021243d80d3f67203
(cherry picked from commit deb1b83199276a6e8dea62d06c026c10474c8712)
This is essentially a revert of a3611513d2bf465fd282d9dc45b3f72c79c232ad
and cfbcc5ece022fc74ae9b987e05c2807df0d82ec5.
Here is what happened: there was a corruption bug that eventually
got fixed by 0174d18d8b51f6c9228c70066a987c30a8132995.
But before finding the root, a3611513d2bf465fd282d9dc45b3f72c79c232ad
and cfbcc5ece022fc74ae9b987e05c2807df0d82ec5 hid the bug
by not imposing length of 1 when it was actually 2 or 3 (which does help
compression as a litteral is more efficient than an offset and a length
of size 2 or 3).
Change-Id: I6f18fc1f583a51ac9d8aab2508458264047cd493
The optimization for (len != MIN_LENGTH) actually only holds for
(len > MIN_LENGTH) but (len < MIN_LENGTH) can now happen as len can
be changed in the loop before.
Change-Id: I3f9f91a540206c80385c5fba96c3d64ab9536752
This is getting back to the old behavior which is actually better for
compression and speed with the latest patches.
Change-Id: I35884bab02589297c25d6e1e66dc5f13e05f7aa7
This was defined (slightly differently) at two places. Created a common
method and moved to utils/utils.[hc].
Change-Id: I66c3ac6dea24e0cd2c0eaa5440f3142b4dbbe23b
we don't need to store the resulting histogram, so no need to
call HistogramAddEval().
Allows some signature simplifications...
Change-Id: I3fff6c45f4a7c6179499c6078ff159df4ca0ac53
In case where the same offset is found in consecutive pixels,
the cost computation from one pixel can be re-used for the next.
Change-Id: Ic03c7d4ab95f3612eafc703349cfefd75273c3d7
and also recycle the malloc'd intervals
This avoids quite some malloc/free cycles during interval managment.
Change-Id: Ic2892e7c0260d0fca0e455d4728f261fb4c3800e
In a lot of cases, only one interval is used. This can cause
a lot of malloc/free cycles for only 56 bytes. By caching this
single interval and re-using it, we remove this cycle in most
frequent cases.
Change-Id: Ia22d583f60ae438c216612062316b20ecb34f029
In some cases, the hash chain for a function is filled several
times:
- GetBackwardReferences -> CalculateBestCacheSize ->
BackwardReferencesLz77 that computes the hash chain
- GetBackwardReferences ->
(not always) BackwardReferencesTraceBackwards ->
BackwardReferencesHashChainDistanceOnly that computes the hash
chain in a slightly different way
Speed and compression performance are slightly changed (+ or -)
but will be homogneized in a later patch.
Change-Id: I43f0ecc7a9312c2ed6cdba1c0fabc6c5ad91c953
Instead of comparing all the following pixels over len (which can
frequently reach the maximum MAX_LENGTH=4096 for some images),
intervals are stored and compared.
Change-Id: I0dafef6cc988dde3c1c03ae07305ac48901d60ee
The old implementation in enc/near_lossless.c performing a separate
preprocessing step is used only when a prediction filter is not used,
otherwise a new implementation integrated into lossless_enc.c is used.
It retains the same logic for converting near lossless quality into max
number of bits dropped, and for adjusting the number of bits based on
the smoothness of the image at a given pixel. As before, borders are not
changed.
Then, instead of quantizing raw component values, the residual after
subtract green and after prediction is quantized according to the
resulting number of bits, taking care to not cross the boundary between
255 and 0 after decoding. Ties are resolved by moving closer to the
prediction instead of by bankers’ rounding.
This results in about 15% size decrease for the same quality.
Change-Id: If3e9c388158c2e3e75ef88876703f40b932f671f
the number of segments are previously validated, but an explicit check
is needed to avoid a warning under gcc-4.9
this is similar to the changes made in:
c8a87bb AssignSegments: quiet -Warray-bounds warning
3e7f34a AssignSegments: quiet array-bounds warning
Change-Id: Iec7d470be424390c66f769a19576021d0cd9a2fd
