README: add details about config files

at: fix argument order

See merge request mobian1/devices/eg25-manager!9

README.md

@@ -29,13 +29,20 @@ $ ninja -C ../eg25-build
 # ninja -C ../eg25-build install
 ```
 
+## Configuration
+
+`eg25-manager` uses device-specific configuration files, named after the
+device-tree `compatible` field. These files are installed to
+`/usr/share/eg25-manager`. They can be copied to `/etc/eg25-manager` then
+modified, that way they won't be overwritten during an upgrade.
+
 ## Running
 
 `eg25-manager` is usually run as a systemd service, but can also be
 manually started from the command-line (requires root privileges):
 
 ```
-# eg25-manager
+# eg25manager
 ```
 
 ## License

data/meson.build

@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2020 Arnaud Ferraris <arnaud.ferraris@gmail.com>
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+
+conf_files = [
+'pine64,pinephone-1.0.toml',
+'pine64,pinephone-1.1.toml',
+'pine64,pinephone-1.2.toml',
+]
+
+install_data(conf_files)

data/pine64,pinephone-1.0.toml

@@ -0,0 +1,55 @@
+[manager]
+need_libusb = true
+usb_vid = 0x2c7c
+usb_pid = 0x0125
+
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 358
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QGPS", value = "1" },
+    { cmd = "QSCLK", value = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" }
+]
+suspend = [
+    { cmd = "QGPSEND" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "1" }
+]
+resume = [
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" },
+    { cmd = "QGPS", value = "1" }
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]

data/pine64,pinephone-1.1.toml

@@ -0,0 +1,55 @@
+[manager]
+need_libusb = true
+usb_vid = 0x2c7c
+usb_pid = 0x0125
+
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 358
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QGPS", value = "1" },
+    { cmd = "QSCLK", value = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" }
+]
+suspend = [
+    { cmd = "QGPSEND" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "1" }
+]
+resume = [
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" },
+    { cmd = "QGPS", value = "1" }
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]

data/pine64,pinephone-1.2.toml

@@ -0,0 +1,48 @@
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 34
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+status = 233
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QGPS", value = "1" },
+    { cmd = "QSCLK", value = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" }
+]
+suspend = [
+    { cmd = "QGPSEND" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "1" }
+]
+resume = [
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" },
+    { cmd = "QGPS", value = "1" }
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]

meson.build

@@ -6,9 +6,9 @@
 #
 
 project (
-  'eg25manager',
+  'eg25-manager',
   'c',
-  version : '0.1.2',
+  version : '0.2.0',
   license : 'GPLv3+',
   meson_version : '>= 0.50.0',
   default_options :
@@ -27,6 +27,7 @@ prefix = get_option('prefix')
 datadir = get_option('datadir')
 sysconfdir = get_option('sysconfdir')
 bindir = join_paths(prefix, get_option('bindir'))
+udevrulesdir = join_paths(prefix, 'lib/udev/rules.d')
 
 if datadir.startswith('/')
   full_datadir = datadir
@@ -40,6 +41,12 @@ else
   full_sysconfdir = join_paths(prefix, sysconfdir)
 endif
 
+eg25_confdir = join_paths(full_sysconfdir, meson.project_name())
+eg25_datadir = join_paths(full_datadir, meson.project_name())
+
+add_global_arguments('-D@0@="@1@"'.format('EG25_CONFDIR', eg25_confdir), language : 'c')
+add_global_arguments('-D@0@="@1@"'.format('EG25_DATADIR', eg25_datadir), language : 'c')
+
 mgr_deps = [
     dependency('glib-2.0'),
     dependency('gio-unix-2.0'),
@@ -49,4 +56,6 @@ mgr_deps = [
     dependency('mm-glib'),
 ]
 
+subdir('data')
 subdir('src')
+subdir('udev')

src/at.c

@@ -16,8 +16,6 @@
 
 #include <glib-unix.h>
 
-#define MODEM_UART "/dev/ttyS2"
-
 struct AtCommand {
     char *cmd;
     char *subcmd;
@@ -26,6 +24,11 @@ struct AtCommand {
     int retries;
 };
 
+static GArray *configure_commands = NULL;
+static GArray *suspend_commands = NULL;
+static GArray *resume_commands = NULL;
+static GArray *reset_commands = NULL;
+
 static int configure_serial(const char *tty)
 {
     struct termios ttycfg;
@@ -202,8 +205,10 @@ static gboolean modem_response(gint fd,
 
         g_message("Response: [%s]", response);
 
-        if (strcmp(response, "RDY") == 0)
+        if (strcmp(response, "RDY") == 0) {
+            suspend_inhibit(manager, TRUE, TRUE);
             manager->modem_state = EG25_STATE_STARTED;
+        }
         else if (strstr(response, "ERROR"))
             retry_at_command(manager);
         else if (strstr(response, "OK"))
@@ -216,16 +221,86 @@ static gboolean modem_response(gint fd,
     return TRUE;
 }
 
-int at_init(struct EG25Manager *manager)
+static void parse_commands_list(toml_array_t *array, GArray **cmds)
 {
-    manager->at_fd = configure_serial(MODEM_UART);
+    int len;
+
+    len = toml_array_nelem(array);
+    *cmds = g_array_new(FALSE, TRUE, sizeof(struct AtCommand));
+    g_array_set_size(*cmds, (guint)len);
+    for (int i = 0; i < len; i++) {
+        struct AtCommand *cmd = &g_array_index(*cmds, struct AtCommand, i);
+        toml_table_t *table = toml_table_at(array, i);
+        toml_datum_t value;
+
+        if (!table)
+            continue;
+
+        value = toml_string_in(table, "cmd");
+        if (value.ok) {
+            cmd->cmd = g_strdup(value.u.s);
+            free(value.u.s);
+        }
+
+        value = toml_string_in(table, "subcmd");
+        if (value.ok) {
+            cmd->subcmd = g_strdup(value.u.s);
+            free(value.u.s);
+        }
+
+        value = toml_string_in(table, "value");
+        if (value.ok) {
+            cmd->value = g_strdup(value.u.s);
+            free(value.u.s);
+        }
+
+        value = toml_string_in(table, "expect");
+        if (value.ok) {
+            cmd->expected = g_strdup(value.u.s);
+            free(value.u.s);
+        }
+    }
+}
+
+int at_init(struct EG25Manager *manager, toml_table_t *config)
+{
+    toml_array_t *commands;
+    toml_datum_t uart_port;
+
+    uart_port = toml_string_in(config, "uart");
+    if (!uart_port.ok)
+        g_error("Configuration file lacks UART port definition");
+
+    manager->at_fd = configure_serial(uart_port.u.s);
     if (manager->at_fd < 0) {
-        g_critical("Unable to configure %s", MODEM_UART);
+        g_critical("Unable to configure %s", uart_port.u.s);
+        free(uart_port.u.s);
         return 1;
     }
+    free(uart_port.u.s);
 
     manager->at_source = g_unix_fd_add(manager->at_fd, G_IO_IN, modem_response, manager);
 
+    commands = toml_array_in(config, "configure");
+    if (!commands)
+        g_error("Configuration file lacks initial AT commands list");
+    parse_commands_list(commands, &configure_commands);
+
+    commands = toml_array_in(config, "suspend");
+    if (!commands)
+        g_error("Configuration file lacks suspend AT commands list");
+    parse_commands_list(commands, &suspend_commands);
+
+    commands = toml_array_in(config, "resume");
+    if (!commands)
+        g_error("Configuration file lacks resume AT commands list");
+    parse_commands_list(commands, &resume_commands);
+
+    commands = toml_array_in(config, "reset");
+    if (!commands)
+        g_error("Configuration file lacks reset AT commands list");
+    parse_commands_list(commands, &reset_commands);
+
     return 0;
 }
 
@@ -234,66 +309,45 @@ void at_destroy(struct EG25Manager *manager)
     g_source_remove(manager->at_source);
     if (manager->at_fd > 0)
         close(manager->at_fd);
+
+    g_array_free(configure_commands, TRUE);
+    g_array_free(suspend_commands, TRUE);
+    g_array_free(resume_commands, TRUE);
+    g_array_free(reset_commands, TRUE);
 }
 
 void at_sequence_configure(struct EG25Manager *manager)
 {
-    /*
+    for (guint i = 0; i < configure_commands->len; i++) {
-     * Default parameters in megi's driver which differ with our own:
+        struct AtCommand *cmd = &g_array_index(configure_commands, struct AtCommand, i);
-     *   - urc/ri/x are always set the same way on both BH and CE
+        append_at_command(manager, cmd->cmd, cmd->subcmd, cmd->value, cmd->expected);
-     *   - urc/ri/x pulse duration is 1 ms and urc/delay is 0 (no need to delay
-     *     URCs if the pulse is that short, so this is expected)
-     *   - apready is disabled
-     *
-     * Parameters set in megi's kernel but not here:
-     *   - sleepind/level = 0
-     *   - wakeupin/level = 0
-     *   - ApRstLevel = 0
-     *   - ModemRstLevel = 0
-     *   - airplanecontrol = 1
-     *   - fast/poweroff = 1
-     * (those would need to be researched to check their usefulness for our
-     * use-case)
-     */
-
-    append_at_command(manager, "QDAI", NULL, NULL, "1,1,0,1,0,0,1,1");
-    append_at_command(manager, "QCFG", "risignaltype", NULL, "\"physical\"");
-    append_at_command(manager, "QCFG", "ims", NULL, "1");
-    if (manager->braveheart) {
-        append_at_command(manager, "QCFG", "urc/ri/ring", NULL, "\"pulse\",2000,1000,5000,\"off\",1");
-        append_at_command(manager, "QCFG", "urc/ri/smsincoming", NULL, "\"pulse\",2000");
-        append_at_command(manager, "QCFG", "urc/ri/other", NULL, "\"off\",1");
-        append_at_command(manager, "QCFG", "urc/delay", NULL, "1");
-    } else {
-        append_at_command(manager, "QCFG", "apready", NULL, "1,0,500");
     }
-    append_at_command(manager, "QURCCFG", "urcport", NULL, "\"usbat\"");
-    if (manager->manage_gnss)
-        append_at_command(manager, "QGPS", NULL, NULL, "1");
-    append_at_command(manager, "QSCLK", NULL, "1", NULL);
-    // Make sure URC cache is disabled
-    append_at_command(manager, "QCFG", "urc/cache", "0", NULL);
     send_at_command(manager);
 }
 
 void at_sequence_suspend(struct EG25Manager *manager)
 {
-    if (manager->manage_gnss)
+    for (guint i = 0; i < suspend_commands->len; i++) {
-        append_at_command(manager, "QGPSEND", NULL, NULL, NULL);
+        struct AtCommand *cmd = &g_array_index(suspend_commands, struct AtCommand, i);
-    append_at_command(manager, "QCFG", "urc/cache", "1", NULL);
+        append_at_command(manager, cmd->cmd, cmd->subcmd, cmd->value, cmd->expected);
+    }
     send_at_command(manager);
 }
 
 void at_sequence_resume(struct EG25Manager *manager)
 {
-    append_at_command(manager, "QCFG", "urc/cache", "0", NULL);
+    for (guint i = 0; i < resume_commands->len; i++) {
-    if (manager->manage_gnss)
+        struct AtCommand *cmd = &g_array_index(resume_commands, struct AtCommand, i);
-        append_at_command(manager, "QGPS", NULL, "1", NULL);
+        append_at_command(manager, cmd->cmd, cmd->subcmd, cmd->value, cmd->expected);
+    }
     send_at_command(manager);
 }
 
 void at_sequence_reset(struct EG25Manager *manager)
 {
-    append_at_command(manager, "CFUN", NULL, "1,1", NULL);
+    for (guint i = 0; i < reset_commands->len; i++) {
+        struct AtCommand *cmd = &g_array_index(reset_commands, struct AtCommand, i);
+        append_at_command(manager, cmd->cmd, cmd->subcmd, cmd->value, cmd->expected);
+    }
     send_at_command(manager);
 }

src/at.h

@@ -8,7 +8,7 @@
 
 #include "manager.h"
 
-int at_init(struct EG25Manager *data);
+int at_init(struct EG25Manager *data, toml_table_t *config);
 void at_destroy(struct EG25Manager *data);
 
 void at_sequence_configure(struct EG25Manager *data);

src/gpio.c

@@ -22,35 +22,12 @@ enum {
     GPIO_OUT_COUNT
 };
 
-static unsigned gpio_out_idx_bh[] = {
-    358,
-    35,
-    68,
-    231,
-    232
-};
-
-static unsigned gpio_out_idx_ce[] = {
-    34,
-    35,
-    68,
-    231,
-    232
-};
 
 enum {
     GPIO_IN_STATUS = 0,
     GPIO_IN_COUNT
 };
 
-static unsigned gpio_in_idx_bh[] = {
-    GPIO_IDX_INVAL,
-};
-
-static unsigned gpio_in_idx_ce[] = {
-    233,
-};
-
 int gpio_sequence_poweron(struct EG25Manager *manager)
 {
     gpiod_line_set_value(manager->gpio_out[GPIO_OUT_PWRKEY], 1);
@@ -92,11 +69,24 @@ int gpio_sequence_resume(struct EG25Manager *manager)
     return 0;
 }
 
-int gpio_init(struct EG25Manager *manager)
+static guint get_config_gpio(toml_table_t *config, const char *id)
+{
+    toml_datum_t value = toml_int_in(config, id);
+    guint gpio;
+
+    if (!value.ok)
+        return GPIO_IDX_INVAL;
+
+    gpio = (guint)value.u.i;
+
+    return gpio;
+}
+
+int gpio_init(struct EG25Manager *manager, toml_table_t *config)
 {
     int i, ret;
-    unsigned *gpio_in_idx;
+    guint gpio_out_idx[GPIO_OUT_COUNT];
-    unsigned *gpio_out_idx;
+    guint gpio_in_idx[GPIO_IN_COUNT];
 
     manager->gpiochip[0] = gpiod_chip_open_by_label(GPIO_CHIP1_LABEL);
     if (!manager->gpiochip[0]) {
@@ -110,16 +100,15 @@ int gpio_init(struct EG25Manager *manager)
         return 1;
     }
 
-    if (manager->braveheart) {
+    gpio_out_idx[GPIO_OUT_DTR] = get_config_gpio(config, "dtr");
-        gpio_in_idx = gpio_in_idx_bh;
+    gpio_out_idx[GPIO_OUT_PWRKEY] = get_config_gpio(config, "pwrkey");
-        gpio_out_idx = gpio_out_idx_bh;
+    gpio_out_idx[GPIO_OUT_RESET] = get_config_gpio(config, "reset");
-    } else {
+    gpio_out_idx[GPIO_OUT_APREADY] = get_config_gpio(config, "apready");
-        gpio_in_idx = gpio_in_idx_ce;
+    gpio_out_idx[GPIO_OUT_DISABLE] = get_config_gpio(config, "disable");
-        gpio_out_idx = gpio_out_idx_ce;
+    gpio_in_idx[GPIO_IN_STATUS] = get_config_gpio(config, "status");
-    }
 
     for (i = 0; i < GPIO_OUT_COUNT; i++) {
-        unsigned int offset, chipidx;
+        guint offset, chipidx;
 
         if (gpio_out_idx[i] < MAX_GPIOCHIP_LINES) {
             offset = gpio_out_idx[i];
@@ -143,7 +132,7 @@ int gpio_init(struct EG25Manager *manager)
     }
 
     for (i = 0; i < GPIO_IN_COUNT; i++) {
-        unsigned int offset, chipidx;
+        guint offset, chipidx;
 
         if (gpio_in_idx[i] == GPIO_IDX_INVAL)
             continue;

src/gpio.h

@@ -8,7 +8,7 @@
 
 #include "manager.h"
 
-int gpio_init(struct EG25Manager *state);
+int gpio_init(struct EG25Manager *state, toml_table_t *config);
 void gpio_destroy(struct EG25Manager *state);
 
 int gpio_sequence_poweron(struct EG25Manager *state);

src/manager.c

@@ -19,8 +19,13 @@
 #include <glib-unix.h>
 #include <libusb.h>
 
-#define EG25_USB_VID 0x2c7c
+#ifndef EG25_CONFDIR
-#define EG25_USB_PID 0x0125
+#define EG25_CONFDIR "/etc/eg25-manager"
+#endif
+
+#ifndef EG25_DATADIR
+#define EG25_DATADIR "/usr/share/eg25-manager"
+#endif
 
 static gboolean quit_app(struct EG25Manager *manager)
 {
@@ -58,14 +63,14 @@ static gboolean modem_start(struct EG25Manager *manager)
     libusb_device **devices = NULL;
     struct libusb_device_descriptor desc;
 
-    if (manager->braveheart) {
+    if (manager->use_libusb) {
         // BH don't have the STATUS line connected, so check if USB device is present
         libusb_init(&ctx);
 
         count = libusb_get_device_list(ctx, &devices);
         for (i = 0; i < count; i++) {
             libusb_get_device_descriptor(devices[i], &desc);
-            if (desc.idVendor == EG25_USB_VID && desc.idProduct == EG25_USB_PID) {
+            if (desc.idVendor == manager->usb_vid && desc.idProduct == manager->usb_pid) {
                 g_message("Found corresponding USB device, modem already powered");
                 should_boot = FALSE;
                 break;
@@ -126,9 +131,9 @@ void modem_reset(struct EG25Manager *manager)
     if (manager->reset_timer)
         return;
 
-    if (manager->suspend_timer) {
+    if (manager->modem_recovery_timer) {
-        g_source_remove(manager->suspend_timer);
+        g_source_remove(manager->modem_recovery_timer);
-        manager->suspend_timer = 0;
+        manager->modem_recovery_timer = 0;
     }
 
     if (!manager->modem_usb_id) {
@@ -165,7 +170,14 @@ void modem_reset(struct EG25Manager *manager)
     return;
 
 error:
-    // Everything else failed, reset the modem
+    // Release blocking sleep inhibitor
+    if (manager->suspend_block_fd >= 0)
+        suspend_inhibit(manager, FALSE, TRUE);
+    if (manager->modem_boot_timer) {
+        g_source_remove(manager->modem_boot_timer);
+        manager->modem_boot_timer = 0;
+    }
+    // Everything else failed, reboot the modem
     at_sequence_reset(manager);
 }
 
@@ -178,7 +190,7 @@ void modem_suspend_post(struct EG25Manager *manager)
 {
     gpio_sequence_suspend(manager);
     g_message("suspend sequence is over, drop inhibitor");
-    suspend_inhibit(manager, FALSE);
+    suspend_inhibit(manager, FALSE, FALSE);
 }
 
 void modem_resume_pre(struct EG25Manager *manager)
@@ -191,21 +203,78 @@ void modem_resume_post(struct EG25Manager *manager)
     at_sequence_resume(manager);
 }
 
+static toml_table_t *parse_config_file(char *config_file)
+{
+    toml_table_t *toml_config;
+    gchar *compatible;
+    gchar error[256];
+    gsize len;
+    FILE *f = NULL;
+
+    if (config_file) {
+        f = fopen(config_file, "r");
+    } else if (g_file_get_contents("/proc/device-tree/compatible", &compatible, &len, NULL)) {
+        g_autoptr (GPtrArray) compat = g_ptr_array_new();
+        gsize pos = 0;
+
+        /*
+         * `compatible` file is a list of NULL-terminated strings, convert it
+         * to an array
+         */
+        do {
+            g_ptr_array_add(compat, &compatible[pos]);
+            pos += strlen(&compatible[pos]) + 1;
+        } while (pos < len);
+
+        for (pos = 0; pos < compat->len; pos++) {
+            g_autofree gchar *filename = g_strdup_printf(EG25_CONFDIR "/%s.toml", (gchar *)g_ptr_array_index(compat, pos));
+            if (access(filename, F_OK) == 0) {
+                g_message("Opening config file: %s", filename);
+                f = fopen(filename, "r");
+                break;
+            }
+        }
+
+        if (!f) {
+            for (pos = 0; pos < compat->len; pos++) {
+                g_autofree gchar *filename = g_strdup_printf(EG25_DATADIR "/%s.toml", (gchar *)g_ptr_array_index(compat, pos));
+                if (access(filename, F_OK) == 0) {
+                    g_message("Opening config file: %s", filename);
+                    f = fopen(filename, "r");
+                    break;
+                }
+            }
+        }
+    }
+
+    if (!f)
+        g_error("unable to find a suitable config file!");
+
+    toml_config = toml_parse_file(f, error, sizeof(error));
+    if (!toml_config)
+        g_error("unable to parse config file: %s", error);
+
+    return toml_config;
+}
+
 int main(int argc, char *argv[])
 {
     g_autoptr(GOptionContext) opt_context = NULL;
     g_autoptr(GError) err = NULL;
     struct EG25Manager manager;
-    char compatible[32];
+    gchar *config_file = NULL;
-    int fd, ret;
+    toml_table_t *toml_config;
+    toml_table_t *toml_manager;
+    toml_datum_t toml_value;
     const GOptionEntry options[] = {
-        { "gnss", 'g', 0, G_OPTION_ARG_NONE, &manager.manage_gnss, "Manage the GNSS feature.", NULL },
+        { "config", 'c', 0, G_OPTION_ARG_STRING, &config_file, "Config file to use.", NULL },
         { NULL, 0, 0, G_OPTION_ARG_NONE, NULL, NULL, NULL }
     };
 
     memset(&manager, 0, sizeof(manager));
     manager.at_fd = -1;
-    manager.suspend_inhibit_fd = -1;
+    manager.suspend_delay_fd = -1;
+    manager.suspend_block_fd = -1;
 
     opt_context = g_option_context_new ("- Power management for the Quectel EG25 modem");
     g_option_context_add_main_entries (opt_context, options, NULL);
@@ -216,21 +285,28 @@ int main(int argc, char *argv[])
 
     manager.loop = g_main_loop_new(NULL, FALSE);
 
-    fd = open("/proc/device-tree/compatible", O_RDONLY);
+    toml_config = parse_config_file(config_file);
-    if (fd < 0) {
-        g_critical("Unable to read 'compatible' string from device tree");
-        return 1;
-    }
-    ret = read(fd, compatible, sizeof(compatible));
-    if (ret > 0 && !strstr(compatible, "pine64,pinephone-1.2"))
-        manager.braveheart = TRUE;
-    close(fd);
 
-    at_init(&manager);
+    toml_manager = toml_table_in(toml_config, "manager");
-    gpio_init(&manager);
+    if (toml_manager) {
-    mm_iface_init(&manager);
+        toml_value = toml_bool_in(toml_manager, "need_libusb");
-    suspend_init(&manager);
+        if (toml_value.ok)
-    udev_init(&manager);
+            manager.use_libusb = toml_value.u.b;
+
+        toml_value = toml_int_in(toml_manager, "usb_vid");
+        if (toml_value.ok)
+            manager.usb_vid = toml_value.u.i;
+
+        toml_value = toml_int_in(toml_manager, "usb_pid");
+        if (toml_value.ok)
+            manager.usb_pid = toml_value.u.i;
+    }
+
+    at_init(&manager, toml_table_in(toml_config, "at"));
+    gpio_init(&manager, toml_table_in(toml_config, "gpio"));
+    mm_iface_init(&manager, toml_table_in(toml_config, "mm-iface"));
+    suspend_init(&manager, toml_table_in(toml_config, "suspend"));
+    udev_init(&manager, toml_table_in(toml_config, "udev"));
 
     g_idle_add(G_SOURCE_FUNC(modem_start), &manager);
 

src/manager.h

@@ -11,6 +11,8 @@
 #include <gudev/gudev.h>
 #include <libmm-glib.h>
 
+#include "toml.h"
+
 enum EG25State {
     EG25_STATE_INIT = 0,
     EG25_STATE_POWERED, // Power-on sequence has been executed, but the modem isn't on yet
@@ -28,7 +30,9 @@ enum EG25State {
 struct EG25Manager {
     GMainLoop *loop;
     guint reset_timer;
-    gboolean manage_gnss;
+    gboolean use_libusb;
+    guint usb_vid;
+    guint usb_pid;
 
     int at_fd;
     guint at_source;
@@ -36,15 +40,19 @@ struct EG25Manager {
 
     enum EG25State modem_state;
     gchar *modem_usb_id;
-    gboolean braveheart;
 
     guint mm_watch;
     MMManager *mm_manager;
     MMModem *mm_modem;
 
     GDBusProxy *suspend_proxy;
-    int suspend_inhibit_fd;
+    int suspend_delay_fd;
-    guint suspend_timer;
+    int suspend_block_fd;
+
+    guint modem_recovery_timer;
+    guint modem_recovery_timeout;
+    guint modem_boot_timer;
+    guint modem_boot_timeout;
 
     GUdevClient *udev;
 

src/meson.build

@@ -12,6 +12,7 @@ executable (
         'manager.c', 'manager.h',
         'mm-iface.c', 'mm-iface.h',
         'suspend.c', 'suspend.h',
+        'toml.c', 'toml.h',
         'udev.c', 'udev.h',
     ],
     dependencies : mgr_deps,

src/mm-iface.c

@@ -35,9 +35,9 @@ static void add_modem(struct EG25Manager *manager, GDBusObject *object)
     g_assert(manager->mm_modem != NULL);
 
     if (manager->modem_state == EG25_STATE_RESUMING) {
-        if (manager->suspend_timer) {
+        if (manager->modem_recovery_timer) {
-            g_source_remove(manager->suspend_timer);
+            g_source_remove(manager->modem_recovery_timer);
-            manager->suspend_timer = 0;
+            manager->modem_recovery_timer = 0;
         }
         modem_resume_post(manager);
         manager->modem_state = EG25_STATE_CONFIGURED;
@@ -167,15 +167,27 @@ static void mm_appeared_cb(GDBusConnection    *connection,
                    NULL, (GAsyncReadyCallback)mm_manager_new_cb, manager);
 }
 
+static void mm_iface_clean(struct EG25Manager *manager)
+{
+    if (manager->mm_manager) {
+        g_clear_object(&manager->mm_manager);
+        manager->mm_manager = NULL;
+    }
+    if (manager->modem_usb_id) {
+        g_free(manager->modem_usb_id);
+        manager->modem_usb_id = NULL;
+    }
+}
+
 static void mm_vanished_cb(GDBusConnection    *connection,
                            const gchar        *name,
                            struct EG25Manager *manager)
 {
     g_message("ModemManager vanished from D-Bus");
-    mm_iface_destroy(manager);
+    mm_iface_clean(manager);
 }
 
-void mm_iface_init(struct EG25Manager *manager)
+void mm_iface_init(struct EG25Manager *manager, toml_table_t *config)
 {
     manager->mm_watch = g_bus_watch_name(G_BUS_TYPE_SYSTEM, MM_DBUS_SERVICE,
                                          G_BUS_NAME_WATCHER_FLAGS_AUTO_START,
@@ -186,14 +198,7 @@ void mm_iface_init(struct EG25Manager *manager)
 
 void mm_iface_destroy(struct EG25Manager *manager)
 {
-    if (manager->mm_manager) {
+    mm_iface_clean(manager);
-        g_clear_object(&manager->mm_manager);
-        manager->mm_manager = NULL;
-    }
-    if (manager->modem_usb_id) {
-        g_free(manager->modem_usb_id);
-        manager->modem_usb_id = NULL;
-    }
     if (manager->mm_watch != 0) {
         g_bus_unwatch_name(manager->mm_watch);
         manager->mm_watch = 0;

src/mm-iface.h

@@ -8,5 +8,5 @@
 
 #include "manager.h"
 
-void mm_iface_init(struct EG25Manager *data);
+void mm_iface_init(struct EG25Manager *data, toml_table_t *config);
 void mm_iface_destroy(struct EG25Manager *data);

src/suspend.c

@@ -13,33 +13,43 @@
 
 #include <gio/gunixfdlist.h>
 
-#define SD_NAME      "org.freedesktop.login1"
+#define SD_NAME         "org.freedesktop.login1"
-#define SD_PATH      "/org/freedesktop/login1"
+#define SD_PATH         "/org/freedesktop/login1"
-#define SD_INTERFACE "org.freedesktop.login1.Manager"
+#define SD_INTERFACE    "org.freedesktop.login1.Manager"
 
 static gboolean check_modem_resume(struct EG25Manager *manager)
 {
     g_message("Modem wasn't probed in time, restart it!");
-    manager->suspend_timer = 0;
+    manager->modem_recovery_timer = 0;
     modem_reset(manager);
 
     return FALSE;
 }
 
-static gboolean drop_inhibitor(struct EG25Manager *manager)
+static gboolean drop_inhibitor(struct EG25Manager *manager, gboolean block)
 {
-    if (manager->suspend_inhibit_fd >= 0) {
+    if (block) {
-        g_message("dropping systemd sleep inhibitor");
+        if (manager->suspend_block_fd >= 0) {
-        close(manager->suspend_inhibit_fd);
+            g_message("dropping systemd sleep block inhibitor");
-        manager->suspend_inhibit_fd = -1;
+            close(manager->suspend_block_fd);
-        return TRUE;
+            manager->suspend_block_fd = -1;
+            return TRUE;
+        }
+    }
+    else {
+        if (manager->suspend_delay_fd >= 0) {
+            g_message("dropping systemd sleep delay inhibitor");
+            close(manager->suspend_delay_fd);
+            manager->suspend_delay_fd = -1;
+            return TRUE;
+        }
     }
     return FALSE;
 }
 
-static void inhibit_done(GObject *source,
+static void inhibit_done_delay(GObject *source,
-                         GAsyncResult *result,
+                               GAsyncResult *result,
-                         gpointer user_data)
+                               gpointer user_data)
 {
     GDBusProxy *suspend_proxy = G_DBUS_PROXY(source);
     struct EG25Manager *manager = user_data;
@@ -47,34 +57,95 @@ static void inhibit_done(GObject *source,
     GVariant *res;
     GUnixFDList *fd_list;
 
-    res = g_dbus_proxy_call_with_unix_fd_list_finish(suspend_proxy, &fd_list, result, &error);
+    res = g_dbus_proxy_call_with_unix_fd_list_finish(suspend_proxy, &fd_list,
+                                                     result, &error);
     if (!res) {
         g_warning("inhibit failed: %s", error->message);
     } else {
         if (!fd_list || g_unix_fd_list_get_length(fd_list) != 1)
             g_warning("didn't get a single fd back");
 
-        manager->suspend_inhibit_fd = g_unix_fd_list_get(fd_list, 0, NULL);
+        manager->suspend_delay_fd = g_unix_fd_list_get(fd_list, 0, NULL);
 
-        g_message("inhibitor fd is %d", manager->suspend_inhibit_fd);
+        g_message("inhibitor sleep fd is %d", manager->suspend_delay_fd);
         g_object_unref(fd_list);
         g_variant_unref(res);
     }
 }
 
-static void take_inhibitor(struct EG25Manager *manager)
+static void inhibit_done_block(GObject *source,
+                               GAsyncResult *result,
+                               gpointer user_data)
+{
+    GDBusProxy *suspend_proxy = G_DBUS_PROXY(source);
+    struct EG25Manager *manager = user_data;
+    g_autoptr (GError) error = NULL;
+    GVariant *res;
+    GUnixFDList *fd_list;
+
+    res = g_dbus_proxy_call_with_unix_fd_list_finish(suspend_proxy, &fd_list,
+                                                     result, &error);
+    if (!res) {
+        g_warning("inhibit failed: %s", error->message);
+    } else {
+        if (!fd_list || g_unix_fd_list_get_length(fd_list) != 1)
+            g_warning("didn't get a single fd back");
+
+        manager->suspend_block_fd = g_unix_fd_list_get(fd_list, 0, NULL);
+
+        g_message("inhibitor block fd is %d", manager->suspend_block_fd);
+        g_object_unref(fd_list);
+        g_variant_unref(res);
+    }
+}
+
+/*
+ * After the EG25 modem sends 'RDY', it takes up to 2 minutes before all
+ * capabilities are operational. If the modem is suspended before that,
+ * calls and texts may be not recognized properly.
+ */
+static gboolean modem_fully_booted(struct EG25Manager *manager)
+{
+    g_message("Modem is up for %u seconds and fully ready", manager->modem_boot_timeout);
+    manager->modem_boot_timer = 0;
+    drop_inhibitor(manager, TRUE);
+
+    return FALSE;
+}
+
+static void take_inhibitor(struct EG25Manager *manager, gboolean block)
 {
     GVariant *variant_arg;
 
-    if(manager->suspend_inhibit_fd != -1)
+    if (block) {
-        drop_inhibitor(manager);
+        if(manager->suspend_block_fd != -1)
+            drop_inhibitor(manager, TRUE);
 
-    variant_arg = g_variant_new ("(ssss)", "sleep", "eg25manager",
+        variant_arg = g_variant_new ("(ssss)", "sleep", "eg25manager",
-                                 "eg25manager needs to prepare modem for sleep", "delay");
+                                     "eg25manager needs to wait for modem to be fully booted",
+                                     "block");
 
-    g_message("taking systemd sleep inhibitor");
+        g_message("taking systemd sleep inhibitor (blocking)");
-    g_dbus_proxy_call_with_unix_fd_list(manager->suspend_proxy, "Inhibit", variant_arg,
+        g_dbus_proxy_call_with_unix_fd_list(manager->suspend_proxy, "Inhibit",
-                                        0, G_MAXINT, NULL, NULL, inhibit_done, manager);
+                                            variant_arg, 0, G_MAXINT, NULL, NULL,
+                                            inhibit_done_block, manager);
+        manager->modem_boot_timer = g_timeout_add_seconds(manager->modem_boot_timeout,
+                                                          G_SOURCE_FUNC(modem_fully_booted),
+                                                          manager);
+    }
+    else {
+        if(manager->suspend_delay_fd != -1)
+            drop_inhibitor(manager, FALSE);
+
+        variant_arg = g_variant_new ("(ssss)", "sleep", "eg25manager",
+                                     "eg25manager needs to prepare modem for sleep",
+                                     "delay");
+
+        g_message("taking systemd sleep inhibitor");
+        g_dbus_proxy_call_with_unix_fd_list(manager->suspend_proxy, "Inhibit",
+                                            variant_arg, 0, G_MAXINT, NULL, NULL,
+                                            inhibit_done_delay, manager);
+    }
 }
 
 static void signal_cb(GDBusProxy *proxy,
@@ -97,10 +168,22 @@ static void signal_cb(GDBusProxy *proxy,
         modem_suspend_pre(manager);
     } else {
         g_message("system is resuming");
-        take_inhibitor(manager);
+        take_inhibitor(manager, FALSE);
         modem_resume_pre(manager);
-        manager->modem_state = EG25_STATE_RESUMING;
+        if (manager->mm_modem) {
-        manager->suspend_timer = g_timeout_add_seconds(9, G_SOURCE_FUNC(check_modem_resume), manager);
+            /*
+             * On some systems ModemManager doesn't handle suspend/resume, so
+             * we still have a valid/managed modem when resuming. In this case,
+             * do the whole resume sequence immediately.
+             */
+            manager->modem_state = EG25_STATE_CONFIGURED;
+            modem_resume_post(manager);
+        } else {
+            manager->modem_state = EG25_STATE_RESUMING;
+            manager->modem_recovery_timer = g_timeout_add_seconds(manager->modem_recovery_timeout,
+                                                                  G_SOURCE_FUNC(check_modem_resume),
+                                                                  manager);
+        }
     }
 }
 
@@ -116,10 +199,10 @@ static void name_owner_cb(GObject *object,
 
     owner = g_dbus_proxy_get_name_owner(proxy);
     if (owner) {
-        take_inhibitor(manager);
+        take_inhibitor(manager, FALSE);
         g_free(owner);
     } else {
-        drop_inhibitor(manager);
+        drop_inhibitor(manager, FALSE);
     }
 }
 
@@ -136,18 +219,37 @@ static void on_proxy_acquired(GObject *object,
         return;
     }
 
-    g_signal_connect(manager->suspend_proxy, "notify::g-name-owner", G_CALLBACK(name_owner_cb), manager);
+    g_signal_connect(manager->suspend_proxy, "notify::g-name-owner",
-    g_signal_connect(manager->suspend_proxy, "g-signal", G_CALLBACK(signal_cb), manager);
+                     G_CALLBACK(name_owner_cb), manager);
+    g_signal_connect(manager->suspend_proxy, "g-signal",
+                     G_CALLBACK(signal_cb), manager);
 
     owner = g_dbus_proxy_get_name_owner(manager->suspend_proxy);
     if (owner) {
-        take_inhibitor(manager);
+        take_inhibitor(manager, FALSE);
         g_free(owner);
     }
 }
 
-void suspend_init(struct EG25Manager *manager)
+void suspend_init(struct EG25Manager *manager, toml_table_t *config)
 {
+    toml_datum_t timeout_value;
+
+    if (config) {
+        timeout_value = toml_int_in(config, "boot_timeout");
+        if (timeout_value.ok)
+            manager->modem_boot_timeout = (guint)timeout_value.u.i;
+
+        timeout_value = toml_int_in(config, "recovery_timeout");
+        if (timeout_value.ok)
+            manager->modem_recovery_timeout = (guint)timeout_value.u.i;
+    }
+
+    if (manager->modem_boot_timeout == 0)
+        manager->modem_boot_timeout = 120;
+    if (manager->modem_recovery_timeout == 0)
+        manager->modem_recovery_timeout = 9;
+
     g_dbus_proxy_new_for_bus(G_BUS_TYPE_SYSTEM,
                              G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START |
                              G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES,
@@ -157,10 +259,15 @@ void suspend_init(struct EG25Manager *manager)
 
 void suspend_destroy(struct EG25Manager *manager)
 {
-    drop_inhibitor(manager);
+    drop_inhibitor(manager, FALSE);
-    if (manager->suspend_timer) {
+    drop_inhibitor(manager, TRUE);
-        g_source_remove(manager->suspend_timer);
+    if (manager->modem_recovery_timer) {
-        manager->suspend_timer = 0;
+        g_source_remove(manager->modem_recovery_timer);
+        manager->modem_recovery_timer = 0;
+    }
+    if (manager->modem_boot_timer) {
+        g_source_remove(manager->modem_boot_timer);
+        manager->modem_boot_timer = 0;
     }
     if (manager->suspend_proxy) {
         g_object_unref(manager->suspend_proxy);
@@ -168,10 +275,10 @@ void suspend_destroy(struct EG25Manager *manager)
     }
 }
 
-void suspend_inhibit(struct EG25Manager *manager, gboolean inhibit)
+void suspend_inhibit(struct EG25Manager *manager, gboolean inhibit, gboolean block)
 {
     if (inhibit)
-        take_inhibitor(manager);
+        take_inhibitor(manager, block);
     else
-        drop_inhibitor(manager);
+        drop_inhibitor(manager, block);
 }

src/suspend.h

@@ -8,7 +8,7 @@
 
 #include "manager.h"
 
-void suspend_init (struct EG25Manager *data);
+void suspend_init (struct EG25Manager *data, toml_table_t *config);
 void suspend_destroy (struct EG25Manager *data);
 
-void suspend_inhibit (struct EG25Manager *data, gboolean inhibit);
+void suspend_inhibit (struct EG25Manager *data, gboolean inhibit, gboolean block);

src/toml.h

@@ -0,0 +1,175 @@
+/*
+  MIT License
+  
+  Copyright (c) 2017 - 2019 CK Tan
+  https://github.com/cktan/tomlc99
+  
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+  
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+  
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+  SOFTWARE.
+*/
+#ifndef TOML_H
+#define TOML_H
+
+
+#include <stdio.h>
+#include <stdint.h>
+
+
+#ifdef __cplusplus
+#define TOML_EXTERN extern "C"
+#else
+#define TOML_EXTERN extern
+#endif
+
+typedef struct toml_timestamp_t toml_timestamp_t;
+typedef struct toml_table_t toml_table_t;
+typedef struct toml_array_t toml_array_t;
+typedef struct toml_datum_t toml_datum_t;
+
+/* Parse a file. Return a table on success, or 0 otherwise. 
+ * Caller must toml_free(the-return-value) after use.
+ */
+TOML_EXTERN toml_table_t* toml_parse_file(FILE* fp, 
+										  char* errbuf,
+										  int errbufsz);
+
+/* Parse a string containing the full config. 
+ * Return a table on success, or 0 otherwise.
+ * Caller must toml_free(the-return-value) after use.
+ */
+TOML_EXTERN toml_table_t* toml_parse(char* conf, /* NUL terminated, please. */
+									 char* errbuf,
+									 int errbufsz);
+
+/* Free the table returned by toml_parse() or toml_parse_file(). Once 
+ * this function is called, any handles accessed through this tab 
+ * directly or indirectly are no longer valid.
+ */
+TOML_EXTERN void toml_free(toml_table_t* tab);
+
+
+/* Timestamp types. The year, month, day, hour, minute, second, z 
+ * fields may be NULL if they are not relevant. e.g. In a DATE
+ * type, the hour, minute, second and z fields will be NULLs.
+ */
+struct toml_timestamp_t {
+	struct { /* internal. do not use. */
+		int year, month, day;
+		int hour, minute, second, millisec;
+		char z[10];
+	} __buffer;
+	int *year, *month, *day;
+	int *hour, *minute, *second, *millisec;
+	char* z;
+};
+
+
+/*-----------------------------------------------------------------
+ *  Enhanced access methods 
+ */
+struct toml_datum_t {
+	int ok;
+	union {
+		toml_timestamp_t* ts; /* ts must be freed after use */
+		char*   s; /* string value. s must be freed after use */
+		int     b; /* bool value */
+		int64_t i; /* int value */
+		double  d; /* double value */
+	} u;
+};
+
+/* on arrays: */
+/* ... retrieve size of array. */
+TOML_EXTERN int toml_array_nelem(const toml_array_t* arr);
+/* ... retrieve values using index. */
+TOML_EXTERN toml_datum_t toml_string_at(const toml_array_t* arr, int idx);
+TOML_EXTERN toml_datum_t toml_bool_at(const toml_array_t* arr, int idx);
+TOML_EXTERN toml_datum_t toml_int_at(const toml_array_t* arr, int idx);
+TOML_EXTERN toml_datum_t toml_double_at(const toml_array_t* arr, int idx);
+TOML_EXTERN toml_datum_t toml_timestamp_at(const toml_array_t* arr, int idx);
+/* ... retrieve array or table using index. */
+TOML_EXTERN toml_array_t* toml_array_at(const toml_array_t* arr, int idx);
+TOML_EXTERN toml_table_t* toml_table_at(const toml_array_t* arr, int idx);
+
+/* on tables: */
+/* ... retrieve the key in table at keyidx. Return 0 if out of range. */
+TOML_EXTERN const char* toml_key_in(const toml_table_t* tab, int keyidx);
+/* ... retrieve values using key. */
+TOML_EXTERN toml_datum_t toml_string_in(const toml_table_t* arr, const char* key);
+TOML_EXTERN toml_datum_t toml_bool_in(const toml_table_t* arr, const char* key);
+TOML_EXTERN toml_datum_t toml_int_in(const toml_table_t* arr, const char* key);
+TOML_EXTERN toml_datum_t toml_double_in(const toml_table_t* arr, const char* key);
+TOML_EXTERN toml_datum_t toml_timestamp_in(const toml_table_t* arr, const char* key);
+/* .. retrieve array or table using key. */
+TOML_EXTERN toml_array_t* toml_array_in(const toml_table_t* tab,
+										const char* key);
+TOML_EXTERN toml_table_t* toml_table_in(const toml_table_t* tab,
+										const char* key);
+
+/*-----------------------------------------------------------------
+ * lesser used 
+ */
+/* Return the array kind: 't'able, 'a'rray, 'v'alue */
+TOML_EXTERN char toml_array_kind(const toml_array_t* arr);
+
+/* For array kind 'v'alue, return the type of values 
+   i:int, d:double, b:bool, s:string, t:time, D:date, T:timestamp
+   0 if unknown
+*/
+TOML_EXTERN char toml_array_type(const toml_array_t* arr);
+
+/* Return the key of an array */
+TOML_EXTERN const char* toml_array_key(const toml_array_t* arr);
+
+/* Return the number of key-values in a table */
+TOML_EXTERN int toml_table_nkval(const toml_table_t* tab);
+
+/* Return the number of arrays in a table */
+TOML_EXTERN int toml_table_narr(const toml_table_t* tab);
+
+/* Return the number of sub-tables in a table */
+TOML_EXTERN int toml_table_ntab(const toml_table_t* tab);
+
+/* Return the key of a table*/
+TOML_EXTERN const char* toml_table_key(const toml_table_t* tab);
+
+/*--------------------------------------------------------------
+ * misc 
+ */
+TOML_EXTERN int toml_utf8_to_ucs(const char* orig, int len, int64_t* ret);
+TOML_EXTERN int toml_ucs_to_utf8(int64_t code, char buf[6]);
+TOML_EXTERN void toml_set_memutil(void* (*xxmalloc)(size_t),
+								  void	(*xxfree)(void*));
+
+
+/*--------------------------------------------------------------
+ *  deprecated 
+ */
+/* A raw value, must be processed by toml_rto* before using. */
+typedef const char* toml_raw_t;
+TOML_EXTERN toml_raw_t toml_raw_in(const toml_table_t* tab, const char* key);
+TOML_EXTERN toml_raw_t toml_raw_at(const toml_array_t* arr, int idx);
+TOML_EXTERN int toml_rtos(toml_raw_t s, char** ret);
+TOML_EXTERN int toml_rtob(toml_raw_t s, int* ret);
+TOML_EXTERN int toml_rtoi(toml_raw_t s, int64_t* ret);
+TOML_EXTERN int toml_rtod(toml_raw_t s, double* ret);
+TOML_EXTERN int toml_rtod_ex(toml_raw_t s, double* ret, char* buf, int buflen);
+TOML_EXTERN int toml_rtots(toml_raw_t s, toml_timestamp_t* ret);
+
+
+#endif /* TOML_H */

src/udev.c

@@ -12,8 +12,11 @@ static void udev_event_cb(GUdevClient *client, gchar *action, GUdevDevice *devic
 {
     struct EG25Manager *manager = data;
 
-    if (strcmp(action, "unbind") != 0 || manager->modem_state == EG25_STATE_RESETTING || !manager->modem_usb_id)
+    if (strcmp(action, "unbind") != 0 ||
+        manager->modem_state == EG25_STATE_RESETTING ||
+        !manager->modem_usb_id) {
         return;
+    }
 
     if (strncmp(g_udev_device_get_name(device), manager->modem_usb_id, strlen(manager->modem_usb_id)) == 0 &&
         manager->reset_timer == 0) {
@@ -22,7 +25,7 @@ static void udev_event_cb(GUdevClient *client, gchar *action, GUdevDevice *devic
     }
 }
 
-void udev_init (struct EG25Manager *manager)
+void udev_init (struct EG25Manager *manager, toml_table_t *config)
 {
     const char * const subsystems[] = { "usb", NULL };
 

src/udev.h

@@ -8,5 +8,5 @@
 
 #include "manager.h"
 
-void udev_init (struct EG25Manager *data);
+void udev_init (struct EG25Manager *data, toml_table_t *config);
 void udev_destroy (struct EG25Manager *data);

udev/80-modem-eg25.rules

@@ -0,0 +1 @@
+ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="2c7c", ATTRS{idProduct}=="0125", ENV{MINOR}=="0", RUN+="/usr/bin/eg25-configure-usb %p"

udev/eg25-configure-usb

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+DEVPATH=/sys/$1
+USB_ID=
+
+[ -d ${DEVPATH} ] || exit 1
+
+while [ ! "${USB_ID}" ]; do
+    if [ -f ${DEVPATH}/avoid_reset_quirk ]; then
+        USB_ID=$(basename ${DEVPATH})
+        break
+    fi
+    DEVPATH=$(dirname ${DEVPATH})
+done
+
+# Avoid USB resets
+echo "auto" > /sys/bus/usb/devices/${USB_ID}/power/control
+echo "3000" > /sys/bus/usb/devices/${USB_ID}/power/autosuspend_delay_ms
+echo "enabled" > /sys/bus/usb/devices/${USB_ID}/power/wakeup
+echo "1" > /sys/bus/usb/devices/${USB_ID}/avoid_reset_quirk
+echo "0" > /sys/bus/usb/devices/${USB_ID}/power/persist

udev/meson.build

@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2020 Arnaud Ferraris <arnaud.ferraris@gmail.com>
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+
+install_data ('eg25-configure-usb', install_dir: bindir)
+install_data ('80-modem-eg25.rules', install_dir: udevrulesdir)