The AT commands list for each stage is now configured per-device, as
well as the UART port to be used.
As this list can be changed by the user, there is no more need for a
special GNSS-related option
The need to use libusb to check for the modem state on startup now
depends on a config option, instead of the device type. The USB PID and
VID are moved to config as well.
This commit prepares the use of device-specific configuration files.
These files should be named after the device-tree `compatible` string
with the `toml` extension.
`eg25-manager` will search for config files in
`<prefix>/etc/eg25-manager` first (or `/etc/eg25-manager` if prefix is
`/usr`), then in `<prefix>/share/eg25-manager`.
The EG25 modem needs at least 2 minutes after indicating 'RDY'
to be fully operational. If the modem is suspended before that,
calls or texts may not be seen by the userspace.
This mostly occurs when a full reboot or poweroff/poweron
sequence of the phone is performed.
:
Most of the modem issues follow a (incomplete) USB device reset. Instead
of relying solely on the existing timer, this patch adds a udev monitor
which resets the modem as soon as its associated USB device is reset,
which greatly improves recovery time.
This patch adds a 3s delay when resetting the modem during which we
avoid triggering a new reset. This makes sure we don't trigger a reset
twice in a row.
It also disables any related running timer to avoid being re-triggered
unnecessarily.
For some reason, during system the main loop exits before we call
g_main_loop_quit(), so don't rely on it and use a simple polling loop to
check for modem poweroff.
`Developer edition` phones have a different compatible string but should
be considered identical to BraveHeart edition here. Therefore BH is the
default phone, unless the compatible is that of a CE phone.
When powering off the modem, we must assert the RESET line only when the
modem has shut down (otherwise it'll cause a hard reset and won't allow
the modem to shut down properly).
This commit also polls the STATUS pin during poweroff and quits
immediately once this pin goes high.
