data: add config files for all pinephone versions

data/pine64,pinephone-1.0.toml

@@ -0,0 +1,54 @@
+[manager]
+need_libusb = true
+usb_vid = 0x2c7c
+usb_pid = 0x0125
+
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 358
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QGPS", value = "1" },
+    { cmd = "QSCLK", value = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" }
+]
+suspend = [
+    { cmd = "QGPSEND" },
+    { cmd = "QCFG", subcmd = "urc/cache", value = "1" }
+]
+resume = [
+    { cmd = "QCFG", subcmd = "urc/cache", value = "0" },
+    { cmd = "QGPS", value = "1" }
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]