diff --git a/data/pine64,pinephone-1.0.toml b/data/pine64,pinephone-1.0.toml
index e127f1a..8b91a88 100644
--- a/data/pine64,pinephone-1.0.toml
+++ b/data/pine64,pinephone-1.0.toml
@@ -34,15 +34,31 @@ configure = [
 #               match, the command is then executed with value `expect` in
 #               order to set the parameter to the configured value (optional)
 # A command can have `expect` OR `value` configured, but it shouldn't have both
+# Print software version
     { cmd = "QGMR" },
+# Configure audio
     { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+# RI signaling using physical RI pin
     { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+# Enable VoLTE support
     { cmd = "QCFG", subcmd = "ims", expect = "1" },
+# Disable APREADY for PP 1.0 because pin is not connected
+    { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+# URC configuration for PP 1.0 (APREADY pin not connected):
+#   * RING URC: extend pulse length
+#   * Incoming SMS URC: extend pulse length
+#   * Other URC: extend pulse length
+#   * Report URCs on all ports (serial and USB) for FOSS firmware
+#   * Delay reporting of URCs
+#   * Configure URC pin to UART Ring Indicator
     { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
-    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
-    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
     { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+    { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
     { cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
+# Allow sleeping for power saving
     { cmd = "QSCLK", value = "1" },
 # GNSS configuration:
 #   * Enable A-GPS data upload support (XTRA)
@@ -62,6 +78,14 @@ configure = [
     { cmd = "QGPSCFG", subcmd = "galileonmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "beidounmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "autogps", expect = "0" },
+# Disable fast poweroff for stability
+    { cmd = "QCFG", subcmd = "fast/poweroff", expect = "0" },
+# Configure sleep and wake up pin levels to active low
+    { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+    { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+# Do not enter RAMDUMP mode, auto-reset instead
+    { cmd = "QCFG", subcmd = "ApRstLevel", expect = "1" },
+    { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "1" },
 ]
 suspend = [
 ]
diff --git a/data/pine64,pinephone-1.1.toml b/data/pine64,pinephone-1.1.toml
index e127f1a..fd09462 100644
--- a/data/pine64,pinephone-1.1.toml
+++ b/data/pine64,pinephone-1.1.toml
@@ -34,15 +34,31 @@ configure = [
 #               match, the command is then executed with value `expect` in
 #               order to set the parameter to the configured value (optional)
 # A command can have `expect` OR `value` configured, but it shouldn't have both
+# Print software version
     { cmd = "QGMR" },
+# Configure audio
     { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+# RI signaling using physical RI pin
     { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+# Enable VoLTE support
     { cmd = "QCFG", subcmd = "ims", expect = "1" },
+# Disable APREADY for PP 1.1 because pin is not connected
+    { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+# URC configuration for PP 1.1 (APREADY pin not connected):
+#   * RING URC: extend pulse length
+#   * Incoming SMS URC: extend pulse length
+#   * Other URC: extend pulse length
+#   * Report URCs on all ports (serial and USB) for FOSS firmware
+#   * Delay reporting of URCs
+#   * Configure URC pin to UART Ring Indicator
     { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
-    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
-    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
     { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+    { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
     { cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
+# Allow sleeping for power saving
     { cmd = "QSCLK", value = "1" },
 # GNSS configuration:
 #   * Enable A-GPS data upload support (XTRA)
@@ -62,6 +78,14 @@ configure = [
     { cmd = "QGPSCFG", subcmd = "galileonmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "beidounmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "autogps", expect = "0" },
+# Disable fast poweroff for stability
+    { cmd = "QCFG", subcmd = "fast/poweroff", expect = "0" },
+# Configure sleep and wake up pin levels to active low
+    { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+    { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+# Do not enter RAMDUMP mode, auto-reset instead
+    { cmd = "QCFG", subcmd = "ApRstLevel", expect = "1" },
+    { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "1" },
 ]
 suspend = [
 ]
diff --git a/data/pine64,pinephone-1.2.toml b/data/pine64,pinephone-1.2.toml
index e16f4f5..4244bee 100644
--- a/data/pine64,pinephone-1.2.toml
+++ b/data/pine64,pinephone-1.2.toml
@@ -31,12 +31,31 @@ configure = [
 #               match, the command is then executed with value `expect` in
 #               order to set the parameter to the configured value (optional)
 # A command can have `expect` OR `value` configured, but it shouldn't have both
+# Print software version
     { cmd = "QGMR" },
+# Configure audio
     { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+# RI signaling using physical RI pin
     { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+# Enable VoLTE support
     { cmd = "QCFG", subcmd = "ims", expect = "1" },
+# Enable APREADY for PP 1.2
     { cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
+# URC configuration for PP 1.2 (APREADY pin connected):
+#   * RING URC: normal pulse length
+#   * Incoming SMS URC: default pulse length
+#   * Other URC: default length
+#   * Report URCs on all ports (serial and USB) for FOSS firmware
+#   * Reporting of URCs without any delay
+#   * Configure URC pin to UART Ring Indicator
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",120,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",120,1" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "0" },
+    { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+    { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
     { cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
+# Allow sleeping for power saving
     { cmd = "QSCLK", value = "1" },
 # GNSS configuration:
 #   * Enable A-GPS data upload support (XTRA)
@@ -56,6 +75,14 @@ configure = [
     { cmd = "QGPSCFG", subcmd = "galileonmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "beidounmeatype", expect = "0" },
     { cmd = "QGPSCFG", subcmd = "autogps", expect = "0" },
+# Disable fast poweroff for stability
+    { cmd = "QCFG", subcmd = "fast/poweroff", expect = "0" },
+# Configure sleep and wake up pin levels to active low
+    { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+    { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+# Do not enter RAMDUMP mode, auto-reset instead
+    { cmd = "QCFG", subcmd = "ApRstLevel", expect = "1" },
+    { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "1" },
 ]
 suspend = [
 ]